Quick weatherstrip alternative question

[camboscams]

So would something like this work in our MK1's. I can't find anything to replace whats there but im wondering if this would work on the car side right on the pinch welded opening.

Just search this number 1120A391 on Mcmaster.com

[camboscams]

The bulb would face outwards. but the more i look at it maybe the bulb should be a little bit bigger.

[rabbitman]

Mounted on the car side I'm not sure what part of the door would seal on it.......I'd really like to have new seals too.

[camboscams]

So where the factory edge grip seal is over the pinch weld in the door opening on the body of the car. The black stuff on each side of where the upper mounting point for the seatbelt. It would seal on the inner facing side of the door.

[GEE-BEE]

Iam running 5000 ft of upper door seal

original mk1 design

GB
[email protected]

[camboscams]

So your making weather strip that is right above the window where it seals on the body? just the short section on the horizontal part of the door?

[GEE-BEE]

you are correct from the original design

I make all the seals for MK1autohaus & silicone hoses for the mk1 & mkII
Vanagon diesel and synros for vancafe

GB