« previous next »
Pages: [1]

Author Topic: WANTED IP Bracket for 1.6  (Read 3770 times)

November 04, 2011, 06:19:39 am

srgtlord

  • Veteran
  • Offline
  • ***
  • 797
WANTED IP Bracket for 1.6
« on: November 04, 2011, 06:19:39 am »
Im resurrecting an old 1.6 I have in my basement. I need the little bracket with screws in it that holds the injection pump to the motor. mine has disappeared.
Logged
Reply #1November 04, 2011, 02:16:50 pm

Toby

  • Veteran
  • Offline
  • ***
  • 728
Re: WANTED IP Bracket for 1.6
« Reply #1 on: November 04, 2011, 02:16:50 pm »
Do you mean the one on the back end of the pump?
Logged
Reply #2November 04, 2011, 07:46:24 pm

lovinthedeez

  • Veteran
  • Offline
  • ***
  • 489
Re: WANTED IP Bracket for 1.6
« Reply #2 on: November 04, 2011, 07:46:24 pm »
20 shipped?  lemme know :)
Logged
location:  ashland, oregon US
Reply #3November 04, 2011, 09:34:23 pm

fatmobile

  • Veteran
  • Offline
  • ***
  • 2922
    • http://www.geocities.com/vwfatmobile/
Re: WANTED IP Bracket for 1.6
« Reply #3 on: November 04, 2011, 09:34:23 pm »
 Some of them have a threaded hole welded to the bottom,
 so you have a place to bolt the dipstick support bracket.

 It's a MK2 thing but you need it if you are working with a MK2 dipstick/engine.
Logged
Tornado red, '91 Golf 4 door, with M-TDI 12mm pump, south bend clutch, VNT-15 turbo, 02A trany
MK4s: 2000 TDI jetta, 2003 TDI wagon, 2000 golf 2.0 gasser.
'84 Rabbit with 1.7TD KY block pistons bored to 80mm, VNT-15
'84 GTI with stock 1.6TD starion intercooler.
Reply #4November 05, 2011, 08:49:10 am

srgtlord

  • Veteran
  • Offline
  • ***
  • 797
Re: WANTED IP Bracket for 1.6
« Reply #4 on: November 05, 2011, 08:49:10 am »
Pictures please
Logged
Pages: [1]
« previous next »