Control arm mounting bolts, where to find? - General - VWDiesel.net The IDI, TDI, and mTDI source.

• Control arm mounting bolts, where to find? by rabbitman on 09 Sep, 2011 19:49
• For some reason my two rear ones (front suspension) are pitted pretty bad so I thought I'd throw new ones at it.
  
  The part # is N 100 874 03 but I can't find anything online about it other than more people looking for the same thing .
  
  Thanks
• #1 by the caveman on 10 Sep, 2011 06:16
• Isn't the rear part of the table on a Rabbit held by a clamp?
  or are you asking about a different model?
• #2 by R.O.R-2.0 on 10 Sep, 2011 12:01
• Quote from: the caveman on 10 Sep, 2011 06:16

  Isn't the rear part of the table on a Rabbit held by a clamp?
  or are you asking about a different model?
  

  
  yes.. the rear is held by a clamp, and it connects to studs on the unibody..
  
  the FRONT of the control arm takes a special bolt tho..
• #3 by rabbitman on 10 Sep, 2011 12:45
• oops, sorry guys, I'm talking about my '92 golf .
  
  These are the bolts that hold the rear of the control arm and the subframe to the body.
• #4 by the caveman on 10 Sep, 2011 17:06
• It's 12mm x 1.5 pitch and 74 mm long [however that may include the 2mm  pointy unthreaded end]. If you can find them at a metric fastener supply, just make sure it's 10.9 or 12.5 grade
• #5 by rabbitman on 10 Sep, 2011 20:50
• Quote from: the caveman on 10 Sep, 2011 17:06

  It's 12mm x 1.5 pitch and 74 mm long [however that may include the 2mm  pointy unthreaded end]. If you can find them at a metric fastener supply, just make sure it's 10.9 or 12.5 grade
  

  
  Yeah I figured that would be my option, thanks.