Control arm mounting bolts, where to find?

[rabbitman]

For some reason my two rear ones (front suspension) are pitted pretty bad so I thought I'd throw new ones at it.

The part # is N 100 874 03 but I can't find anything online about it other than more people looking for the same thing .

Thanks

[the caveman]

Isn't the rear part of the table on a Rabbit held by a clamp?
or are you asking about a different model?

[R.O.R-2.0]

Isn't the rear part of the table on a Rabbit held by a clamp?
or are you asking about a different model?

yes.. the rear is held by a clamp, and it connects to studs on the unibody..

the FRONT of the control arm takes a special bolt tho..

[rabbitman]

oops, sorry guys, I'm talking about my '92 golf .

These are the bolts that hold the rear of the control arm and the subframe to the body.

[the caveman]

It's 12mm x 1.5 pitch and 74 mm long [however that may include the 2mm  pointy unthreaded end]. If you can find them at a metric fastener supply, just make sure it's 10.9 or 12.5 grade

[rabbitman]

It's 12mm x 1.5 pitch and 74 mm long [however that may include the 2mm  pointy unthreaded end]. If you can find them at a metric fastener supply, just make sure it's 10.9 or 12.5 grade

Yeah I figured that would be my option, thanks.