is this still a good donor for a 11mm pump swap?

[carrizog60]

hi

when doing a plunger swap do i need the head or can i put my head and all the other bits of the pump donor?
because of this:


thanks

[R.O.R-2.0]

that head has an 11mm bore, for an 11mm plunger.

does your other head have an 11mm bore? if not, then no dice. usually the pump head, and plunger are manufactured as a matched set..

[carrizog60]

ok,thanks.
it was going to serve as a donor for a bigger head swap but if its unmatch then bad luck.

is that such a difference that cant be done?

[carrizog60]

that one as,from what i can see, a broken delivery valve right?
if i put the aaz delivery valves that can work?or is going to spray diesel everywere from there?

[carrizog60]

no one?

[R.O.R-2.0]

well, you need to get that DV out first..

[carrizog60]

i can take it out.
other than that should be ok?

[R.O.R-2.0]

start experimenting.. let us know.

its not going to blow up in your face like a bomb.. its either going to work, or not going to work..

[carrizog60]

dont want to spend 50 or more euros on a chance...
its on ebay still