« previous next »
Pages: [1]

Author Topic: Reverse switch for gearbox  (Read 3568 times)

July 22, 2011, 06:08:52 pm

Hiho

  • Junior
  • Offline
  • **
  • 77
Reverse switch for gearbox
« on: July 22, 2011, 06:08:52 pm »
Hi everyone,

I have a gearbox with the 5 of 8 pin reverse switch plug. Unfortunately the pins have corroded and snapped off. I believe any of the multi pin type switches will work. Postage is to Australia. Also, a 16 tooth speedo cable drive gear would help the cause....

Cheers!

Matt
Logged
1978 1.5 GLD
1978 1.6D soon to be TD
Reply #1July 22, 2011, 07:01:21 pm

rabbitman

  • Veteran
  • Offline
  • ***
  • 2788
Re: Reverse switch for gearbox
« Reply #1 on: July 22, 2011, 07:01:21 pm »
You can take old switches apart, I did that and swapped internals around to make it work. Then I got LED backup lights to lower the current through the switch.
Logged
'82 Rabbit, I put on a euro vnt-15, 2.25" DP, 2.5" exhaust, the result.....it whistled.

I removed the turbo, made a toilet bowl 2.5" DP, the result....it was deafening. Now it has a homemade muffler up front and a thrush in the rear, the result.....less loud.
Watch: AGENDA, GRINDING AMERICA DOWN
Reply #2July 22, 2011, 08:54:15 pm

CRSMP5

  • Guest
Re: Reverse switch for gearbox
« Reply #2 on: July 22, 2011, 08:54:15 pm »
they sold 2 or 3 different pin layouts for that switch.. so you gotta get the right one..

also you will want to add in a load reduction relay to power the back up lights.. else it will just melt/ruin another swich down the road..
Logged
Pages: [1]
« previous next »