Would an Audi front wheel hub fit on a Golf 2?

[Fredrikkk]

I've found some nice rims that are made for a Peugeot with ET13 and 4x108. I can't use adapters so I wondered if Audi wheel hubs and discs will fit since they are 4x108. Anyone know this?

[R.O.R-2.0]

pretty positive that they wont work.. fronts or rears.

someone else can confirm tho. it was a long time ago when i was reading about it..

[Fredrikkk]

Anybody else know? I really need to know 

[Vangruver]

give it a go here

http://forums.vwvortex.com/forumdisplay.php?5003-Technical-%28VW-Audi%29

i can't figure out what area this fits in specifically, but you're best answer would be found here.

[R.O.R-2.0]

ive never seen or heard of a conversion, so i doubt it works. why cant you just buy adapters? they make them..

[Fredrikkk]

I can't use adapter because I'd end up at like -ET 7 and that's too much I think at stock ride height. Or could I make it stay under the fenders with the arch trim glued a little out?

[R.O.R-2.0]

mk2s have LOTS of room in the fender wells..

wheel adapters are not very thick. you want adapters.. not adapters/spacers..

[Fredrikkk]

The thinnest adapter I can find is 20mm.

But you're saying ET -7 will be fine at stock ride height?

[R.O.R-2.0]

idk what et -7 is, compared to something else..

i know that i have way oversized tires on my mk2, and they only rub ever so slightly, and only at certain spots. conditions have to be just right..