WTB: Passenger Performance Intake Manifold - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• WTB: Passenger Performance Intake Manifold by Big Daddy Roth on 28 May, 2011 20:07
• what you got?
• #1 by R.O.R-2.0 on 30 May, 2011 07:10
• prolly be easier and cheaper to build your own, or have a shop build you one..
• #2 by Big Daddy Roth on 30 May, 2011 12:48
• OK.
  
  Where can I find a DXF or DWG for AAZ flange? I have WaterJet.
• #3 by Thezorn on 30 May, 2011 17:50
• Quote from: Big Daddy Roth on 30 May, 2011 12:48

  OK.
  
  Where can I find a DXF or DWG for AAZ flange? I have WaterJet.
  

  
  If you are able to find one, and able to cut one with your water jet, let me know. I would be intersted in buying some flanges off of you to play around with to make more intake manifolds.
• #4 by R.O.R-2.0 on 31 May, 2011 08:17
• Quote from: Big Daddy Roth on 30 May, 2011 12:48

  OK.
  
  Where can I find a DXF or DWG for AAZ flange? I have WaterJet.
  

  
  its easier to take a stock AAZ intake manifold like dave did, cut the top of it off, weld an extension onto the plenum, im not even sure if his manifolds were dual plenum or not..
• #5 by Big Daddy Roth on 31 May, 2011 10:40
• I made this for ABA,
  
  
  
  I'd like to make the same for AAZ.
• #6 by theman53 on 31 May, 2011 14:10
• There is a place called weirtech in canada somewhere. I have a link but the site has been down for months so it doesn't help. http://weirtech.ca/catalog/product_info.php?cPath=13_28&products_id=178
  
  That is the link....maybe you could use an intake gasket and make it up yourself? IDK how that works just a suggestion.
• #7 by R.O.R-2.0 on 31 May, 2011 16:38
• thats a nice piece of work..
• #8 by Thezorn on 06 Jun, 2011 21:06
• Quote from: Big Daddy Roth on 31 May, 2011 10:40

  I made this for ABA,
  
  
  
  I'd like to make the same for AAZ.
  

  
  An AAZ one would be very simple, copy the intake manifold gasket and your set.
  If you make any please let me know!!