Oil Squirters Removal/Honing Block - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• Oil Squirters Removal/Honing Block by ein bora on 13 Apr, 2011 22:34
• On my aaz they are held in with a fairly small bolt, when I tried to remove the bolts they didn't want to come loose to easily so I didn't try any further as I am afraid I may break one. Is this normal or what do I need to do in order to get them out safely.
  Thanks.
• #1 by BillyWillicker on 13 Apr, 2011 22:37
• They are loctited in reall good.  Give 'em a twist.
• #2 by DJPyro on 14 Apr, 2011 08:40
• Yeah mine all broke free pretty easily, but the breakaway torque was pretty high on them... You'll be fine.
• #3 by fatmobile on 15 Apr, 2011 01:19
• If they are hard to unscrew, sometimes I'll put the bit in place and smack it with a hammer.
• #4 by ein bora on 15 Apr, 2011 07:59
• Once I found out that they where Loctited in - they came out with no injuries to me or the bolts.
  As always, great information. Thank you.
• #5 by fatmobile on 16 Apr, 2011 00:30
• Remember to put some sealant around the part that plugs into the block when you reinstall.