SOLDI have for sale all the bits you will need to convert your 1.6 to a serpentine belt driven alternator and water pump setup. Sadly the alternator tester at Canadian Tire is broken so I can not test the alternator. It's going to be sold as-is.
The alternator is a 90 AMP unit so it is from a car that had AC. I don't see any reason why it won't bolt up to the non-ac setup though. If anyone knows otherwise please let me know.
I have all the nuts and bolts you will need. Please note that the bolts are technically TTY and should not be reused. I wouldn't hesitate to reuse them though.
Please refer to the FAQ I made and that has been improved by several members of this site for install questions. It can be found here
http://www.vwdiesel.net/forum/index.php?topic=9599.0 Here is a picture of what you are buying. Note the crank pulley is not pictured. It is included though. It is still attached to the crank gear (it spun) so it may be a pain to remove without a vice or impact gun.
http://img.photobucket.com/albums/v603/burnyourmoney/DSC09762.jpgAs you can see I am including a brand new belt.
I also have another alternator (65A) that is seized BUT it has a good clutched pulley on it. Whoever buys the kit can have the extra alternator for the cost of shipping if they want.
Looking for $150 but am open to all reasonable offers. Shipping will be $25 in Canada and $45 in the states. Add $10 for the extra alternator in Canada and $15 in the USofA.
IMs only
Getting closer Vince...
Topic: FS diesel non AC serp setup conversion (Read 4076 times)
