Author Topic: WTB 83 Jetta Coolant bottle bracket (Read 4187 times)

gitkrunk · « **on:** March 04, 2011, 01:18:41 pm »

i need one so i can mount my coolant overflow bottle =[
anyone got one? i need shipped to Anchorage AK 99515

Quantum TD · « **Reply #1 on:** March 04, 2011, 03:20:48 pm »

Isn't it welded to the inner fender?

gitkrunk · « **Reply #2 on:** March 04, 2011, 03:45:48 pm »

i believe it is spot welder into the fender.
i need one though =[

theman53 · « **Reply #3 on:** March 04, 2011, 07:19:49 pm »

I maybe able to hack the GTI one off and send it. Let me know if you don't find one closer and I will see if it is possible.

R.O.R-2.0 · « **Reply #4 on:** March 05, 2011, 08:57:49 am »

the easiest way would prolly be to drill the spot welds.. or use an air hammer with a chisel bit.

theman53 · « **Reply #5 on:** March 05, 2011, 09:29:23 am »

I was going to go full retard on it and just cut the entire thing off the strut tower and send it for him to molest as needed.

Quantum TD · « **Reply #6 on:** March 05, 2011, 09:37:34 am »

Never go full retard.

R.O.R-2.0 · « **Reply #7 on:** March 05, 2011, 09:45:35 am »

I was going to go full retard on it and just cut the entire thing off the strut tower and send it for him to molest as needed.

lol.. good one.. full retard.

gitkrunk · « **Reply #8 on:** March 07, 2011, 11:34:27 am »

cool thanks for sending it.

theman53 · « **Reply #9 on:** March 07, 2011, 05:29:39 pm »

I never got any info to go ahead. Let me know if you need me to go full retard and I will.

PM me your details and whatnot if that is the case.