« previous next »
Pages: 1 [2]

Author Topic: Project 12mm in full swing  (Read 5036 times)

Reply #15March 05, 2011, 07:18:51 pm

jaysen71581

  • Junior
  • Offline
  • **
  • 211
  • Personal Text
    Hagerstown, MD
Re: Project 12mm in full swing
« Reply #15 on: March 05, 2011, 07:18:51 pm »

New block with new oil pump and goodies from the old motor swapped over

Very dirty pic of the new motor, i have just spent 30 mins cleaning it but you all get the before pics... The new engine color is a surprise.....

Old block

Old cracked block, just a phase of disassembly

Some eye candy for ya,my next project..
Logged
Reply #16March 06, 2011, 12:28:12 pm

jaysen71581

  • Junior
  • Offline
  • **
  • 211
  • Personal Text
    Hagerstown, MD
Re: Project 12mm in full swing
« Reply #16 on: March 06, 2011, 12:28:12 pm »
Ok today was a very eventful day, i got the block super clean and couldnt resist the urge of painting, the head i decided to take off and give a good cleaning to and while the trans is out i an replacing the inputshaft seal... so here she is.... Once paint has dried ill start putting back on the IP and alternator and all of those fun parts..
Logged
Reply #17March 09, 2011, 05:41:50 pm

jaysen71581

  • Junior
  • Offline
  • **
  • 211
  • Personal Text
    Hagerstown, MD
Re: Project 12mm in full swing
« Reply #17 on: March 09, 2011, 05:41:50 pm »
No progress lately just retooling the garage, cleaning up the bench and waiting on my HG to come in then after thats here ill be putting on the IP and all of the other little goodies for my new motor...
Logged
Reply #18April 21, 2011, 09:57:06 am

jaysen71581

  • Junior
  • Offline
  • **
  • 211
  • Personal Text
    Hagerstown, MD
Re:UPDATED Project 12mm in full swing
« Reply #18 on: April 21, 2011, 09:57:06 am »
Ok its been awhile and i have been side tracked with transmission maintence and time, i have gotten the motor back into the car and all i need to do is fill it full of coolant, prime the fuel system and attach some halfshafts and charge a battery, hopefully i can start her up sometime today..... 8)
Logged
Reply #19April 21, 2011, 11:07:46 am

rallydiesel

  • Veteran
  • Offline
  • ***
  • 1880
Re: Project 12mm in full swing
« Reply #19 on: April 21, 2011, 11:07:46 am »
Every time I see this thread title I always expect it to be a fire-breathing 12mm injection pump build.  ;D
Logged
2006 Jetta TDI - gtb1749v, Malone 2, Frank's Titan 2 cam, VR6 clutch....
1991 Jetta TD - sold :(
2001 Golf TDI - Son's
1981 Rabbit - BEW tdi swap project

"ONCE YOU GO CLACK, YOU NEVER GO BACK"
Reply #20April 21, 2011, 11:38:31 am

jaysen71581

  • Junior
  • Offline
  • **
  • 211
  • Personal Text
    Hagerstown, MD
Re: Project 12mm in full swing
« Reply #20 on: April 21, 2011, 11:38:31 am »
my next motor build after i move into a house and have a real garage will be a true TD motor bored .40 over with a giles super pump with intercooler and everything, im just gonna go nuts with that motor, and i may put it in a cabby or a rabbit convertible  ;)
Logged
Reply #21April 21, 2011, 12:19:45 pm

R.O.R-2.0

  • Veteran
  • Offline
  • ***
  • 7335
  • Personal Text
    Pacific Northwest - Oregon - USA
Re: Project 12mm in full swing
« Reply #21 on: April 21, 2011, 12:19:45 pm »
Quote from: jaysen71581 on April 21, 2011, 11:38:31 am
my next motor build after i move into a house and have a real garage will be a true TD motor bored .40 over with a giles super pump with intercooler and everything, im just gonna go nuts with that motor, and i may put it in a cabby or a rabbit convertible  ;)

a caBBy and rabbit convertible are one in the same..

a caDDy is a pickup

and FWIW, the Rocco is the lightest mk1..
Logged
92 Jetta GLI - Black, 1.6D w/ GT2056V turbo..
86 GTI - 4 Door, Med Twilight Gray, Tow Machine..
86 Audi Coupe GT - Tornado Red, All Stock.. WRECKED.
89 Toyota 4Runner - Dark Grey Metallic, LIFTED!

Turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.
Reply #22April 21, 2011, 04:03:16 pm

jaysen71581

  • Junior
  • Offline
  • **
  • 211
  • Personal Text
    Hagerstown, MD
Re: Project 12mm in full swing
« Reply #22 on: April 21, 2011, 04:03:16 pm »
Im embarassed i never mix up double d's and b's lol damn...... I stand corrected lol.... :-*
Logged
Reply #23April 21, 2011, 06:08:34 pm

jaysen71581

  • Junior
  • Offline
  • **
  • 211
  • Personal Text
    Hagerstown, MD
Re: Project 12mm in full swing
« Reply #23 on: April 21, 2011, 06:08:34 pm »
Well i got some good news, i got my car running tonight even if it was for only 10 seconds, it would start up and i had it at WOT but it would just barely at idle speed, i have never messed with any settings on my IP, anyone have a good FAQ for getting to know ones turbo IP and what screws affect what part of the motor ect..
Logged
Reply #24April 21, 2011, 06:10:57 pm

theman53

  • Global Moderator
  • Veteran
  • Offline
  • ***
  • 7835
  • Personal Text
    Holmes County Ohio - North Central Ohio
Re: Project 12mm in full swing
« Reply #24 on: April 21, 2011, 06:10:57 pm »
our faq on making your 1.6td a faster car is a good faq to start :D
Logged
Pages: 1 [2]
« previous next »