Stainless Alien Head VNT flange 1/2"

[rodpaslow]

I ended up buying 1/2" thick 304 stainless plate (expensive) to make a VNT flange for a VNT 15 turbo I bought.  Plate was 12 x 12" and it will make about 6 of these flanges.

I will cut into a triangular shape and cut the center hole only.  You can drill the bolt holes and shape it the way you like.  If for a VNT 17, I will need to know outlet size for the large hole.

I can sell 5 of these.

$20.00 USD