Your blower motor resistor needs replacing. As well, depending on how much damage has been done to the speed selector (melting, arcing) it may need to be replaced, along with the electrical connector if it has melted. It's not a big job, the resistor are $20 or so, the climate control unit I sell for $35 on ebay when I have them (and I don't right now). If your connector is pooched, you can get one out of just about any VW from the 90's that used same/similar climate control.Ian
I say replace the fan switch first. They always get hot and destroy themselves.
Quote from: Henchman on December 12, 2010, 08:07:27 pmYour blower motor resistor needs replacing. As well, depending on how much damage has been done to the speed selector (melting, arcing) it may need to be replaced, along with the electrical connector if it has melted. It's not a big job, the resistor are $20 or so, the climate control unit I sell for $35 on ebay when I have them (and I don't right now). If your connector is pooched, you can get one out of just about any VW from the 90's that used same/similar climate control.Iando you have the resistors...if so, point me in the direction of your ebay name and a writeup.(for replacing the resistor)..(i already have a spare climate control module...but the way those control cables are hooked up at the back it looks likes its a PITA to replace...CheersPaul
Quote from: the caveman on December 12, 2010, 08:46:50 pmI say replace the fan switch first. They always get hot and destroy themselves.But why do they always destroy themselves?