Author Topic: FS: 1.6 balancer type crankshaft accessory pulleys  (Read 3884 times)

December 12, 2010, 08:30:46 am

ilikevwdiesel

  • Veteran

  • Offline
  • ***

  • 1202
    • Erupt into a BEVRAGE this summer with Glug!
FS: 1.6 balancer type crankshaft accessory pulleys
« on: December 12, 2010, 08:30:46 am »
have two available 20 each light surface rust on grooves will clean up not nicked or bent. 15 ea. usps flat rate box is 10.70 anywhere in us
Look, if corn and kudzu fall in love and have a baby in a lab under the supervision of scientists working in my employ, WHO AM I TO STOP THAT other than the CEO responsible for stopping it???

My Bio

Reply #1December 12, 2010, 09:23:40 pm

fatmobile

  • Veteran

  • Offline
  • ***

  • 2926
    • http://www.geocities.com/vwfatmobile/
Re: FS: 1.6 balancer type crankshaft accessory pulleys
« Reply #1 on: December 12, 2010, 09:23:40 pm »
$30.70 shipped for 2 crank pullys?
 Do you have a waterpump pully too?

 
Tornado red, '91 Golf 4 door, with M-TDI 12mm pump, south bend clutch, VNT-15 turbo, 02A trany
MK4s: 2000 TDI jetta, 2003 TDI wagon, 2000 golf 2.0 gasser.
'84 Rabbit with 1.7TD KY block pistons bored to 80mm, VNT-15
'84 GTI with stock 1.6TD starion intercooler.

Reply #2December 13, 2010, 02:25:18 am

ilikevwdiesel

  • Veteran

  • Offline
  • ***

  • 1202
    • Erupt into a BEVRAGE this summer with Glug!
Re: FS: 1.6 balancer type crankshaft accessory pulleys
« Reply #2 on: December 13, 2010, 02:25:18 am »
no the pulleys are 20 each and one or both of them will fit into a 10.70$ flat rate box. you dig? Pretty sure I have a wp pulley too buy a crank pulley and the wp pulley is another 5$ as long as it all goes in the same box.
« Last Edit: December 13, 2010, 02:34:43 am by ilikevwdiesel »
Look, if corn and kudzu fall in love and have a baby in a lab under the supervision of scientists working in my employ, WHO AM I TO STOP THAT other than the CEO responsible for stopping it???

My Bio

Reply #3December 13, 2010, 10:16:23 pm

fatmobile

  • Veteran

  • Offline
  • ***

  • 2926
    • http://www.geocities.com/vwfatmobile/
Re: FS: 1.6 balancer type crankshaft accessory pulleys
« Reply #3 on: December 13, 2010, 10:16:23 pm »
Yeah, a little confusing.
 It says $20 and $15 in your first post,..
 Figured it was 1 for 20, 2 for $30.
 Still doesn't explain how I came up with $30.70 shipped for 2, ha.
 How about $40.70 for 2 shipped?
and $5 more for the waterpump pully if you find one.
Tornado red, '91 Golf 4 door, with M-TDI 12mm pump, south bend clutch, VNT-15 turbo, 02A trany
MK4s: 2000 TDI jetta, 2003 TDI wagon, 2000 golf 2.0 gasser.
'84 Rabbit with 1.7TD KY block pistons bored to 80mm, VNT-15
'84 GTI with stock 1.6TD starion intercooler.

Reply #4December 14, 2010, 02:48:49 am

ilikevwdiesel

  • Veteran

  • Offline
  • ***

  • 1202
    • Erupt into a BEVRAGE this summer with Glug!
Re: FS: 1.6 balancer type crankshaft accessory pulleys
« Reply #4 on: December 14, 2010, 02:48:49 am »
Yeah, a little confusing.
 It says $20 and $15 in your first post,..
 Figured it was 1 for 20, 2 for $30.
 Still doesn't explain how I came up with $30.70 shipped for 2, ha.
 How about $40.70 for 2 shipped?
and $5 more for the waterpump pully if you find one.


lol man am I retarded... I am almost positive I have the wp pulley too you can have it all for that price sorry for the typo. Will pm you when I find it later today.
« Last Edit: December 14, 2010, 02:52:48 am by ilikevwdiesel »
Look, if corn and kudzu fall in love and have a baby in a lab under the supervision of scientists working in my employ, WHO AM I TO STOP THAT other than the CEO responsible for stopping it???

My Bio