So I didn't do a good job at all labeling or documenting the electrical system before tearing it apart a number of months ago. I haven't done a lot of Bentley homework but I hate reading the electrical diagrams in black and white, and I wish it had more description on the actual connectors.
So hopefully someone can help me identify how these go back together.
Passenger side, parking light and turn signal wiring. Black connector with a green/black and a pair of brown, from main lighting extension harness. From turn signal, white, black, and brown. Also nearby, from parking light, brown, white(ish), maybe I have these already correct?
Similarly on driver side:
On driver side, off of main harness. "T" type of connector, brown and yellow/black. Unknown destination.
Also on driver side, black/white(?) single connector, black connector with brown, black/white, brown.
Driver side, near main battery/alt/starter wiring. Two larger red wires with eyebolt connectors - pretty sure these were on the side of my main + post wiring (as shown). Large diameter red/black wiring that goes to a black and also a white connector. Unknown destination.
Driver side, brown wiring to black double connector. White connector with white, white/green. White connector with white/green(?) and brown.
Driver side, out of harness with some of the engine sender wiring, white connector, white/green and red/white.
Driver side near battery. Pretty sure this was on the side of the main battery minus post.
Off of center front head coolant flange. Green wire goes from switch into harness. Other prong of switch, green wire to I believe the AC compressor? Not sure here, also new AC compressor has different plug. Before was one spade terminal, now has two.
Driver side, further towards firewall, out of main harness. White connector with green/red and brown.
Thanks in advance!