« previous next »
Pages: [1]

Author Topic: Parting AHU block and head  (Read 5973 times)

November 09, 2010, 08:14:54 am

ilikevwdiesel

  • Veteran
  • Offline
  • ***
  • 1202
    • Erupt into a BEVRAGE this summer with Glug!
Parting AHU block and head
« on: November 09, 2010, 08:14:54 am »
have a 98 AHU with a hole in one of the pistons and matching damage to the head. anyone need any parts off it before I crush it?
Logged
Look, if corn and kudzu fall in love and have a baby in a lab under the supervision of scientists working in my employ, WHO AM I TO STOP THAT other than the CEO responsible for stopping it???

My Bio
Reply #1November 09, 2010, 08:37:36 am

Quantum TD

  • Veteran
  • Offline
  • ***
  • 1195
Re: Parting AHU block and head
« Reply #1 on: November 09, 2010, 08:37:36 am »
I'd save the head. Franks TDIs in Missouri might buy it. While I would never BUY anything from him (he me hard on a head once), you might get some money for it. He fixes some brutal stuff, and then sells the heads for like $700. He's on TDI Club forum.

Save the Vacuum pump!
« Last Edit: November 30, 2010, 05:51:03 pm by burn_your_money »
Logged
Reply #2November 09, 2010, 05:01:33 pm

quietmission

  • Junior
  • Offline
  • **
  • 96
Re: Parting AHU block and head
« Reply #2 on: November 09, 2010, 05:01:33 pm »
Is the block useable or does it have a hole too?
Logged
"Let it keep on ticking"
Reply #3November 09, 2010, 05:06:45 pm

ilikevwdiesel

  • Veteran
  • Offline
  • ***
  • 1202
    • Erupt into a BEVRAGE this summer with Glug!
Re: Parting AHU block and head
« Reply #3 on: November 09, 2010, 05:06:45 pm »
Quote from: quietmission on November 09, 2010, 05:01:33 pm
Is the block useable or does it have a hole too?

this engine was in a car with the head off for a few years, at some point the PO put some lubriplate on them but not as soon as he should of I'd say cause there's some rust (like a shadow) on the bores that would only be fixed by boring them out. So the block is good if you don't mind going 1st over on the cylinders.
Logged
Look, if corn and kudzu fall in love and have a baby in a lab under the supervision of scientists working in my employ, WHO AM I TO STOP THAT other than the CEO responsible for stopping it???

My Bio
Reply #4November 29, 2010, 11:00:30 am

BigVWman

  • Veteran
  • Offline
  • ***
  • 332
Re: Parting AHU block and head
« Reply #4 on: November 29, 2010, 11:00:30 am »
How is the no 2 piston/rod looking? Would you sell it separate? Thanks
Logged
Tim
83 rabbit shell 92 cabby tdi conversion, 91 cabby aba conversion, 87 cabby,  87 gti,  01nb tdi new project,00 1.8t nb, 98 ranger,92 f150 flareside(its pink) 97 cabrio and a 00 cabrio!
Reply #5November 29, 2010, 11:22:44 am

ilikevwdiesel

  • Veteran
  • Offline
  • ***
  • 1202
    • Erupt into a BEVRAGE this summer with Glug!
Re: Parting AHU block and head
« Reply #5 on: November 29, 2010, 11:22:44 am »
#2 looks fine 25 plus shipping for the assembly.
Logged
Look, if corn and kudzu fall in love and have a baby in a lab under the supervision of scientists working in my employ, WHO AM I TO STOP THAT other than the CEO responsible for stopping it???

My Bio
Reply #6November 29, 2010, 12:21:33 pm

BigVWman

  • Veteran
  • Offline
  • ***
  • 332
Re: Parting AHU block and head
« Reply #6 on: November 29, 2010, 12:21:33 pm »
I'll take it.Shipping to Apex, nc 27523. Do you do paypal and at what address- pm me if needed! Thanks
Logged
Tim
83 rabbit shell 92 cabby tdi conversion, 91 cabby aba conversion, 87 cabby,  87 gti,  01nb tdi new project,00 1.8t nb, 98 ranger,92 f150 flareside(its pink) 97 cabrio and a 00 cabrio!
Reply #7November 29, 2010, 12:23:37 pm

ilikevwdiesel

  • Veteran
  • Offline
  • ***
  • 1202
    • Erupt into a BEVRAGE this summer with Glug!
Re: Parting AHU block and head
« Reply #7 on: November 29, 2010, 12:23:37 pm »
EMAIL ME: ilikevwdiesel at yahoo dot you know what
Logged
Look, if corn and kudzu fall in love and have a baby in a lab under the supervision of scientists working in my employ, WHO AM I TO STOP THAT other than the CEO responsible for stopping it???

My Bio
Reply #8November 29, 2010, 01:19:03 pm

ilikevwdiesel

  • Veteran
  • Offline
  • ***
  • 1202
    • Erupt into a BEVRAGE this summer with Glug!
Re: Parting AHU block and head
« Reply #8 on: November 29, 2010, 01:19:03 pm »
Piston has a hold down the center.

« Last Edit: November 29, 2010, 01:25:59 pm by ilikevwdiesel »
Logged
Look, if corn and kudzu fall in love and have a baby in a lab under the supervision of scientists working in my employ, WHO AM I TO STOP THAT other than the CEO responsible for stopping it???

My Bio
Reply #9December 06, 2010, 05:47:47 am

BigVWman

  • Veteran
  • Offline
  • ***
  • 332
Re: Parting AHU block and head
« Reply #9 on: December 06, 2010, 05:47:47 am »
Parts arrived as expected! Thanks again.
Logged
Tim
83 rabbit shell 92 cabby tdi conversion, 91 cabby aba conversion, 87 cabby,  87 gti,  01nb tdi new project,00 1.8t nb, 98 ranger,92 f150 flareside(its pink) 97 cabrio and a 00 cabrio!
Pages: [1]
« previous next »