-
#15
by
GEE-BEE
on 03 Nov, 2010 07:37
-
List the part from Mcmaster carr with the toll to be correct....
GB
-
#16
by
Quantum TD
on 17 Nov, 2010 21:39
-
Any update on this???
-
#17
by
ilikevwdiesel
on 18 Nov, 2010 02:53
-
The prototype is back with the machinist, he's going to modify it so it is smaller and can be used without removing the seal flange. They should be ready by the middle of next week sorry for the delay.
-
#18
by
ilikevwdiesel
on 19 Nov, 2010 09:06
-
wtf?
-
#19
by
the caveman
on 19 Nov, 2010 11:32
-
wtf wtf?
-
#20
by
starrd
on 24 Nov, 2010 07:51
-
Any updates?
-
#21
by
ilikevwdiesel
on 24 Nov, 2010 15:33
-
Still working on it sorry about the delays I am filled with shame.
-
#22
by
SR Heer
on 29 Nov, 2010 19:40
-
I will be needing to buy or rent tool when it becomes available - thanks!
-
#23
by
Quantum TD
on 24 Jan, 2011 07:57
-
Any updates?
-
#24
by
dh13
on 24 Jan, 2011 08:05
-
Depending on price I am in for one as well.
Also the correct Mcmaster Carr part number would be great. Would make it easier for all of us.
Thanks
-
#25
by
ilikevwdiesel
on 24 Jan, 2011 08:20
-
It is with great regret I must inform everyone interested in this item that it will not be available for the foreseeable future. The machinist that made the original has left the company where he made it and taken employment in another industry. Supposedly he has 6 of them almost complete but every time I contact him it's always, "I'll get to it this weekend". I'm done chasing him, if he contacts me and tells me they're ready I will post but for now it's a no go. Sorry for the letdown.
-
#26
by
macka
on 30 Jan, 2011 07:14
-
do you have schematics? I can probably source out a cnc model if you have the measurements. I just need a safe depth, and an outer diameter to fit without bagging the seal flange.
-
#27
by
CdnVWJunkie
on 24 Feb, 2011 08:12
-
Is anyone else going to step up and offer these?
-
#28
by
ilikevwdiesel
on 24 Feb, 2011 16:06
-
all you have to do is take a crankshaft and a TDI pulley to a machine shop, email them this thread and they should be able to make one for you.