what IP reseal kit do I need? - page 1 - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• what IP reseal kit do I need? by 79rabbit4dr on 27 Oct, 2010 21:51
• I'm pretty sure my injection pump is leaking at the back. I'd like to reseal it on my own due to the fact that I'm dirt poor at the moment...
  
  How do I know which kit I need? I've searched/read enough to expect a Bosch reseal kit for about $30 and not to include the front seal or bushings... but can't find any info on where (online) I can order one. Or should I try the local Autozone/O'Rielly/CarQuest/etc.? (hate dealing with those people, if it's not a Ford/Chev truck, they know nothing about it)
• #1 by fatmobile on 27 Oct, 2010 23:20
• Find your local bosch service center,.. there is a locator on the internet.
  
  NA pump? DGK-126,..
  and a shaft seal,
   pretty sure it's 17mm?
  
   For a TD pump;
   a DGK-126,
   with the o-ring for the aneroid (can't find the part number but the bosch guy should know)
   and 17mm? shaft seal
   If you get a DGK-121 it'll have the aneroid o-ring,.. along with a 19mm shaft seal you don't need.
• #2 by rabbitman on 28 Oct, 2010 11:58
• http://cgi.ebay.com/ebaymotors/VW-Diesel-Bosch-VE-Injector-Pump-Rebuild-Kit-Injection-_W0QQcmdZViewItemQQhashZitem3a5f82e5f8QQitemZ250710517240QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
  
  I bought one of these, haven't used it yet but it looks right and the guy was good to deal with.
• #3 by fatmobile on 28 Oct, 2010 15:42
• Pretty good price on a seal set,.. even gives you the injector screw-on covers.
   I don't see TD applications mentioned in the list,.. or see the little o-ring for the enrichment pin.
   
• #4 by 79rabbit4dr on 28 Oct, 2010 20:29
• Quote from: fatmobile on 27 Oct, 2010 23:20

  NA pump? DGK-126,..
  and a shaft seal,
   pretty sure it's 17mm?
  

  
  Mine is a 1.6L NA so I guess a Bosch reseal kit # DGK-126 is what I'm looking for then?
  
  

  Quote from: fatmobile on 27 Oct, 2010 23:20

  Find your local bosch service center,.. there is a locator on the internet.

  
  http://www.boschservice.com/FindSvcCenter/Pages/FindingaServiceCenter.aspx
  The closest one in ID (my state) is 6 hours away according to the finder,
  The closest one in UT is 4 hours away according to the finder.
  
  

  Quote from: rabbitman on 28 Oct, 2010 11:58

  
  http://cgi.ebay.com/ebaymotors/VW-Diesel-Bosch-VE-Injector-Pump-Rebuild-Kit-Injection-_W0QQcmdZViewItemQQhashZitem3a5f82e5f8QQitemZ250710517240QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

  I guess I'll check out the e-bay one a little closer, I just worry it's not what it appears to be.
  
  Thanks guys!!
• #5 by Powered by Spearco on 28 Oct, 2010 20:50
• I can get you everything tomarrow from the shop. But you'ld have to wait for the shipping?
  You want the complete 1.6L NA seal kit, bushings and the front main seal?
• #6 by rabbitman on 28 Oct, 2010 20:55
• Hey Spearco, you can get IP bushings? How much? Are they real bosch ones or nameless chinese? I've got some "from a certain guy that sells chinese stuff" that I could use if I have to. Thanks
• #7 by 79rabbit4dr on 29 Oct, 2010 17:56
• Quote from: Powered by Spearco on 28 Oct, 2010 20:50

  I can get you everything tomarrow from the shop. But you'ld have to wait for the shipping?
  You want the complete 1.6L NA seal kit, bushings and the front main seal?
  

  
  All Bosch?
  I'll give you a call on monday Josh. Still the same #?
  
• #8 by Powered by Spearco on 30 Oct, 2010 15:51
• PM sent  .
• #9 by Quantum TD on 31 Oct, 2010 00:15
• Quote from: rabbitman on 28 Oct, 2010 11:58

  http://cgi.ebay.com/ebaymotors/VW-Diesel-Bosch-VE-Injector-Pump-Rebuild-Kit-Injection-_W0QQcmdZViewItemQQhashZitem3a5f82e5f8QQitemZ250710517240QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
  
  I bought one of these, haven't used it yet but it looks right and the guy was good to deal with.
  

  
  I've bought from him before. It was genuine Bosch.
• #10 by 79rabbit4dr on 01 Nov, 2010 13:15
• Quote from: Powered by Spearco on 30 Oct, 2010 15:51

  PM sent  .
  

  
  I'm at the hospital with my wife... baby #2's coming today. I'll get a hold of you when things settle down.
• #11 by rabbitman on 02 Nov, 2010 00:01
• Quote from: 79rabbit4dr on 01 Nov, 2010 13:15

  I'm at the hospital with my wife... baby #2's coming today. I'll get a hold of you when things settle down.
  

  
  CONGRATULATIONS!!!!!!!!!!! Babies are such fun! I have a bunch of nieces and I don't know how I survived before they came along!!! haha
• #12 by Powered by Spearco on 02 Nov, 2010 21:00
• Congratulations.
  
  Whats the name? Is it a boy? When will he have a cool VW TD build thread? 
• #13 by 79rabbit4dr on 04 Nov, 2010 22:17
• Quote from: Powered by Spearco on 02 Nov, 2010 21:00

  Congratulations.
  
  Whats the name? Is it a boy? When will he have a cool VW TD build thread? 
  

  
  His name is Colby and as soon as I can afford all the TD parts, he'll be out there helping me. I did that with my daughter too
• #14 by Powered by Spearco on 04 Nov, 2010 22:23
• Lucky kids  , cool dad  .