-
Intercooler Install , VW Rabbit Truck MKI
by
GEE-BEE
on 03 Oct, 2010 23:23
-
I wanted to relocate my battery to under the bed or behind the passenger seat for room for a intercooler install
I purchased a CNC Optima mount and Battery and rotated the cnc mount 90 degrees and now the battery fits sideways with plenty of
room for the two 90 degree elbows on each side of the 675 mm MKII radiator swap.
Installation parts : a PD130 with a 2' tubes and will have a custom Bell intercooler make a 2' thick custom intercooler
( I will advise a bell part # later )
Size ( intercooler )will be 2' outlets , 2 thick x 26 wide x 8 depth , Iam going to send them a stock radiator for them to use the stock condenser a/c mounts.
I will finish the install after the tube bead roller arrives and the upper and lower 1.6 Td coolant hose and the the scirocco lower coolant radiator hose is finished from production.
I am using a MKII fan and I will install a dash switch to turn on for long pull's, I did have to find a fan MKII harness and a new temp sensor for the radiator( three pin)
WANT A PIC ?
Contact me at
[email protected]
-
#1
by
Baron VonZeppelin
on 04 Oct, 2010 23:40
-
Sounds like great ideas and excellent concepts all the way through.
Should be a KilleR set-up.
-
#2
by
punkvideo81
on 05 Oct, 2010 13:35
-
Sounds cool. I heard someone here mention installing their battery under the bed
-
#3
by
zukgod1
on 11 Oct, 2010 11:41
-
Post up a pic man!!
-
#4
by
theman53
on 11 Oct, 2010 11:45
-
Installation parts : a PD130 with a 2' tubes and will have a custom Bell intercooler make a 2' thick custom intercooler
( I will advise a bell part # later )
Size ( intercooler )will be 2' outlets , 2 thick x 26 wide x 8 depth , Iam going to send them a stock radiator for them to use the stock condenser a/c mounts.
sounds good, but what if you want a/c? Also, when this is done is there a possibility of group buy for price or is it just going to be bad no matter what
-
#5
by
GEE-BEE
on 11 Oct, 2010 19:51
-
BELLINTERCOOLER.COM Will build what ever you need, a large 1-1/2 thick this will work with a a/c condenser also.
Gee-Bee
I wil post part # and price when they have it
-
#6
by
GEE-BEE
on 14 Oct, 2010 15:06
-
ref: a/c Condenser
You can just piggy back them
They can also make a 1-1/2 thick also
New 675mm radiator sent today
Stay in touch and dont change that Dial.....
GB
-
#7
by
Smokey Eddy
on 22 Oct, 2010 08:08
-
Gee-Bee, i want a comprehensive thread of mostly pictures of your Porsche and your Caddy.
-
#8
by
GEE-BEE
on 23 Oct, 2010 11:41
-
-
#9
by
GEE-BEE
on 25 Oct, 2010 11:23
-
Spoke with bell today , they are going to add a cross bracce on the intercooler mount to attach to the 6 mm screws on the radiator tank's
I was informed that the outlets can be ordered in 2', 2'25 or 2'50 at the time of order
He will give me a correct size based on CFM's and the psi/hp we need
My outlet's will be two inch, one one on each side, towards the upper part of the intercooler
My tubing will be 2' ( black)red coupler's to match my coolant / radiator hoses..
Iam finishing all of my tubing, still waiting for beader before my tubing goes to powdercoat ( black)
My PD130 and race pipe will probly be just polished
GB
-
#10
by
79rabbit4dr
on 17 Nov, 2010 01:07
-
Gee-Bee, i want a comprehensive thread of mostly pictures of your Porsche and your Caddy.
X2!!!
-
#11
by
RabbitJockey
on 11 Dec, 2010 17:34
-
-
#12
by
mystery3
on 11 Dec, 2010 21:39
-
I will finish the install after the tube bead roller arrives and the upper and lower 1.6 Td coolant hose and the the scirocco lower coolant radiator hose is finished from production.
What's the difference between the rocco lower rad hose and mk1? Is it any longer?
-
#13
by
theman53
on 11 Dec, 2010 21:52
-
The way Komifornia is headed with marriage it won't be long until you can marry that thing. From what i have heard is out there the IC would not be a bad choice IMHO. That is amazing.
-
#14
by
mystery3
on 12 Dec, 2010 00:53
-
The way Komifornia is headed with marriage it won't be long until you can marry that thing. From what i have heard is out there the IC would not be a bad choice IMHO. That is amazing.
Gee-Bee is from Orange County, it does not get more evangelical or right wing than that. Besides what's your point?