Can someone point me to a online place i can order a 1.9L AAZ headgasket??

[dropdtop]

I've been searching online now for over a hour and cant seem to find a place that has the AAZ gaskets.

I'm in need of a 2 notch gasket (.89mm protrusion measured)

Thanks in advance,
Brad M

[theman53]

Myke W forum moderator here. Where I got mine 1 notch though.

[RabbitJockey]

my friend, who actually gets on here got one at napa, he works there and just looked up the part number and ordered it in, so they are available in the usa if u can get a good counter person, which i doubt you will at advance or some where else

[dropdtop]

Thanks,  I'll try napa on monday..  if that doesnt pan out maybe Myke W can help me

[janb]

I get mine here
http://halseyimportparts.com/

[Rabbit on Roids]

napa auto parts, AAZ gaskets are cheap there...

[dropdtop]

Thanks guys I found the part at NAPA,,   its sold under Altrom and the part number they had for the 2 hole was :ATM  028103383BC

The part numbers I found on this site for that gasket ended in BJ but they had no cross reference for that.

Hope this helps someone in the future.

Brad M

BTW it was sold for 47.89US

[Luckypabst]

$29 at Partsgeek, for a '94 Golf

[ventureforth]

I like this place http://www.partsplaceinc.com/products/search-results.aspx

[wiener]

diesel VW.com is a great place for diesel VW parts,they may not be the quickest to ship parts but it is hard to find cheaper parts.

[Alcaid]

diesel VW.com is a great place for diesel VW parts,they may not be the quickest to ship parts but it is hard to find cheaper parts.

One of Prothe's sites. From the picture the AAZ gasket isn't MLS as it's supposed to be, sent them an e-mail and got a confirmation that what you see is what you get. 

[belchfire]

I was considering the AAZ gasket too and went to Halsey imports ( I live near Portland) but they only listed 2&3 notch options. Needed a 1 notch so I went with a stock victor-rentz 1.6.

[AudiVWguy]

Didn't 53-WILLEYS have a place for custom head gaskets. It sounded like the way to go.

[theman53]

This guy with 4 posts bumped a 5 month old thread and filled it with IMHO a subpar vendor. What a weiner

[duffer]

I was considering the AAZ gasket too and went to Halsey imports ( I live near Portland) but they only listed 2&3 notch options. Needed a 1 notch so I went with a stock victor-rentz 1.6.

Altrom lists a  1-notch head gasket Part#028 103 383BB
                    2-Notch  "        "            #028 103 383BC
                    3-Notch  "        "            #028 103 383BD