Fs: k24 turbo and other parts

[gtidiesel1.6]

K24 Turbo,
Oil pan with return fitting
oil drain line
stock oil feedline
braided feedline
turbo intake hose
90degree elbow (turbo to intake manifold)

$250 + shipping for the above, will consider parting

Also have fmic setup
-audi 5000 turbo with aluminum endtanks welded on
-pipes but i need the couplers for a current project
there is a bov flange welded on one of the pipes though.(cut off and weld up the hole or bolt a block off plate onto it)

$80+ shipping for the fmic stuff


I also have a minty "Turbo Diesel" front grill emblem off a mk2 somewhere around here. If i find it $65 shipped.

2 MK1 1.6 alternators. one from a TD and one from a NA(rebuilt). $30+ shipping each

Near mint mk1 westy grill with red stripe (3 slight cracks) $40+shipping

1 MK1 N/A Injector pump with governor mod done to it. $100obo + shipping

8 New valve stem seals for 8v motors (will post part # later) $2 when you buy something

8 New copper exhaust manifold nuts, $4 when you buy something else

8v ARP headstuds, from a gasser, do they fit diesels? $85 shipped

I have some more stuff, ill have to go through my parts shed, also parting a mk1 gti if anyone needs that sort of stuff?

[gtidiesel1.6]

Also got a NA 1.6 injector pump off a mk1.

[rabbitman]

The gasser headstuds would be 11mm and afaik will work as 11mm diesel studs.

Does the GTI still have the front swaybar and hardware? How much?

[Big Daddy Roth]

I could use the stock oil feed/return lines.

[gtidiesel1.6]

no sorry i already stole the sway bars for my jetta

send me a pm with your postal code and ill figure out a shipped price for those lines.

[Big Daddy Roth]

pm'd

[CalgaryMcLean]

I'm looking for the exhaust manifold from a 1.6TD.  Got one?

Kevin

[VW_Commuter]

If you separate the parts how much for the TD oilpan and the braided oil feed line?

[dl_sledding]

K24 Turbo,
Oil pan with return fitting
oil drain line
stock oil feedline
braided feedline
turbo intake hose
90degree elbow (turbo to intake manifold)

$250 + shipping for the above, will consider parting
...

What kind of shape is the K24 in?  I have a bad one, and need to replace it...  I'd take it all for that price if I am guaranteed the turbo is in good condition.

[Baron VonZeppelin]

What kind of shape is the K24 in?  I have a bad one, and need to replace it...  I'd take it all for that price if I am guaranteed the turbo is in good condition.

DL , i was in contact with gtidiesel1.6 over this weekend.
He was preparing to go on a trip for 12 days leaving on Monday morning. So it may be just a while before he responds/contacts you.
Very nice guy to deal with.
Just trying to help out a little here.

I don't know how much of that list he still has.
Only know that the intake hose has been sold - to me.
Hopefully the K24 is still available for you.
Good Luck 

[gtidiesel1.6]

Thanks todd, i do have internet access here, im not out in the wilderness
Yes sorry the turbo stuff is sold.

[Baron VonZeppelin]

I would have doubted that, but since you actually posted, i have to accept the obvious. lol
That Canada place is really getting with it these days ! 

[dl_sledding]

LOL.... I was outta town for a week too.

Sorry to hear the stuff is sold.  Still looking for one if anyone hears of one for sale.  They seem to be getting really hard to find.  What would you guys recommend instead on a 1.6 IDI?  I have the trapezoidal shaped flange on the exhaust mani.

Thanks!

[gtidiesel1.6]

May have a k14 available shortly. a little smaller than a k24

[dl_sledding]

Interested in the K14! Shipping to 58301 and cost? Also, is it the trapezoidal mount on the exhaust flange? Condition?