Author Topic: 84 1.6L TD Quantum torque specs needed. (Read 3263 times)

steve · « **on:** December 09, 2005, 12:02:32 pm »

can't seem to find torque specs online. anyone have a link?

I'm getting spooled up to fix my 84 1.6L TD Quantum. Got a new head from Topline, new gaskets and such, new crank bolt, and new crank pulley. Just need to torque that crank bolt properly this time (with locktite) and I'll be good to go. Any handy tips for torquing the crank bolt with engine in car would be appreciated. And the torque spec too.

jackbombay · « **Reply #1 on:** December 09, 2005, 12:32:40 pm »

Oops.

steve · « **Reply #2 on:** December 09, 2005, 12:47:02 pm »

For the timing belt drive sprocket

jackbombay · « **Reply #3 on:** December 09, 2005, 12:53:14 pm »

Youcan hold the pulley wheel with a strap wrench while you torque the bolt.

steve · « **Reply #4 on:** December 09, 2005, 01:24:56 pm »

THANK YOU!!!!!!

I was thinking of using a prybar on the flywheel starter gear against the bellhousing timing opening. Is that a bad idea?

jackbombay · « **Reply #5 on:** December 09, 2005, 01:35:56 pm »

Quote from: "steve"

I was thinking of using a prybar on the flywheel starter gear against the bellhousing timing opening. Is that a bad idea?

Will probably work, but I'd wait for someone more expirienced to chime in. Are you interested in the manual?