Author Topic: F.S. feeler for 1.6 n/a motor and other td parts  (Read 3634 times)

May 21, 2010, 01:19:23 pm

KinseyJ

  • Newbie

  • Offline
  • *

  • 11
F.S. feeler for 1.6 n/a motor and other td parts
« on: May 21, 2010, 01:19:23 pm »
as stated, i have a 1.6 n/a out of a 91 jetta. bought the car new and put 205,000 miles on it and the water pump died and overheated the motor. bought a 1.6 td and now have that in my car. wanted to know what i could get for it. complete with injection pump,intake and exhaust manifolds. head has some small cracks inbetween the valves(good for a core). motor is entirely disassembled cause i got curious as to the inards ;D but shows minimal wear on main and rod bearings and cylinder walls. also i have a 1.6td downpipe, intake manifold, 1.8t stock intercooler. email me if interested in any of the above. [email protected] located in bellingham Washington. looking for local pick prefferably.
« Last Edit: May 21, 2010, 11:49:12 pm by KinseyJ »
91' jetta 1.6TD, G60 intake manifold, GTD injectors, FMIC, custom downpipe, 2.5" straitpipe exhaust, oversized pistons, fresh rebuild, running 10 psi. finally done!! 9 gruelling months of late nights in the garage.

Reply #1May 21, 2010, 04:55:42 pm

ilikevwdiesel

  • Veteran

  • Offline
  • ***

  • 1202
    • Erupt into a BEVRAGE this summer with Glug!
Re: feeler for 1.6 n/a motor and other td parts
« Reply #1 on: May 21, 2010, 04:55:42 pm »
You may want to put a straight edge on the head to make sure it's not warped.
Look, if corn and kudzu fall in love and have a baby in a lab under the supervision of scientists working in my employ, WHO AM I TO STOP THAT other than the CEO responsible for stopping it???

My Bio

Reply #2May 21, 2010, 11:51:08 pm

KinseyJ

  • Newbie

  • Offline
  • *

  • 11
Re: F.S. feeler for 1.6 n/a motor and other td parts
« Reply #2 on: May 21, 2010, 11:51:08 pm »
Yeah wasn't really worried about that cause i wouldn't think anyone would want to reuse the head, just good for a core charge as far as i'm concerned.
91' jetta 1.6TD, G60 intake manifold, GTD injectors, FMIC, custom downpipe, 2.5" straitpipe exhaust, oversized pistons, fresh rebuild, running 10 psi. finally done!! 9 gruelling months of late nights in the garage.