Author Topic: FS: 1.6TD pistons (no rods) in good shape...PICS UP (Read 4603 times)

RabbitGTDguy · « **on:** November 29, 2005, 10:37:10 pm »

My dad was digging through some of my old diesel stuff and happened upon a box with some spare 1.6 TD pistons that I had gotten out of a Quantum TD that I had parted quite a while ago. They are in good shape and show no signs of bad timing belt jobs, etc. I figured someone on here could use them.

60 US + shipping and someone has a nice set

I'll have pics in about a week, my dad is sending the box up my way. They are all 4 there along with their wrist pins of course.

Joe

Justin · « **Reply #1 on:** November 30, 2005, 01:20:07 pm »

what is the bore stamped on the top of them? they might fit perfect in my soon to be rebuilt block

RabbitGTDguy · « **Reply #2 on:** November 30, 2005, 08:24:13 pm »

I can check on that here soon when they arrive...shouldn't be long... They are Standards...i can tell you that, but I don't know their green mark stamp... Will check if its important to you. A cleaning and reringing and they'd be good to go...

Joe

Justin · « **Reply #3 on:** December 01, 2005, 07:40:23 am »

if you could check their diameter for me i should know today what the bore is like on my block so I will tell you if they will work or not.

if you want you can email me at [email protected]

Thanks
Justin

RabbitGTDguy · « **Reply #4 on:** December 01, 2005, 12:55:18 pm »

Sounds good...i should be able to check them soon. They were removed from a motor with only 100k on it, but a bad head along with some "other" things... I don't have them in hand yet, but will soon.

Joe

RabbitGTDguy · « **Reply #5 on:** December 07, 2005, 12:09:32 pm »

Here are the pics...just arrived today. Hope they are clear enough. The bore stamped on the top is 76.48....all four of course...

Let me know...

RabbitGTDguy · « **Reply #6 on:** December 13, 2005, 10:00:19 pm »

Pistons are sold ...or rather "traded" for something that will help alot with the m-TDI swap

Joe