EBC on a K26 with metal pipe for wastegate->compressor

[dubCanuck1]

Hi all,

Next question. How would one go about hooking up one of Malone's EBCs to a K26? My old garrett had a rubber section which you can splice. The K26 has a metal pipe from the wastegate to the compressor housing.

Anyone done this?

[zagarus]

could you just chop a section of the piping and splice it in with rubber hoses like a garrett?

[dubCanuck1]

That's one of the thoughts we're running with. The other being to get some brass elbows from Mopac and some rigid hose to replace the whole contraption.

[vanbcguy]

On my K24 I just cut a little bit out of the metal tube and connected my controller there.  Worked fine...

[dubCanuck1]

Thanks guys.