« previous next »
Pages: [1]

Author Topic: Wrist pin sizes  (Read 2208 times)

November 15, 2005, 03:02:10 pm

vwmike

  • Authorized Vendor
  • Veteran
  • Offline
  • ***
  • 1158
Wrist pin sizes
« on: November 15, 2005, 03:02:10 pm »
What are the wrist pin sizes of the 1.6 vs the 1.9? I haven't been able to find this info so far.
Logged


Reply #1November 15, 2005, 06:46:29 pm

QuickTD

  • Veteran
  • Offline
  • ***
  • 1156
Wrist pin sizes
« Reply #1 on: November 15, 2005, 06:46:29 pm »
1.9TD (AAZ) 26mm
1.6D/TD 24mm

Both bushings are 25mm in length.
Logged
Reply #2November 15, 2005, 06:54:08 pm

malone

  • Administrator
  • Veteran
  • Offline
  • ****
  • 1156
    • Malone Tuning Ltd.
Re: Wrist pin sizes
« Reply #2 on: November 15, 2005, 06:54:08 pm »
Planning on installing 1.9 pistons in a 1.6 block?
Logged
http://www.tunezilla.com
93 Eurovan AHU TDI
96 Golf 1.9L ASV TDI - I bought it back!
97 Golf Variant Syncro 1.9L 1Z TDI - sold and missed
11 Golf 2.0L CJAA TDI DSG - Stage 4
14 Golf Wagon 2.0L CJAA TDI DSG - Sold
17 BMW 328d wagon - Sold
09 BMW 335d 3.0L
Reply #3November 15, 2005, 07:18:07 pm

vwmike

  • Authorized Vendor
  • Veteran
  • Offline
  • ***
  • 1158
Re: Wrist pin sizes
« Reply #3 on: November 15, 2005, 07:18:07 pm »
Quote from: "malone"
Planning on installing 1.9 pistons in a 1.6 block?


Nope. I fully realize the 1.9 has a 95.5mm stroke so they would not work. I'm actually contemplating aftermarket rods so I need to figure out what I'm going to have to do. Are the 1.9 rods 159mm like the ABA rods or are they just 144's or something?
Logged
Reply #4November 16, 2005, 05:57:36 am

vwmike

  • Authorized Vendor
  • Veteran
  • Offline
  • ***
  • 1158
Wrist pin sizes
« Reply #4 on: November 16, 2005, 05:57:36 am »
I found one reference that says they are 172mm? That would make the deck height higher than I would have figured.
Logged
Pages: [1]
« previous next »