Author Topic: SOLDSOLDSOLD (Read 5169 times)

ObscuredByClouds · « **on:** January 31, 2010, 05:00:43 pm »

SOLDSOLD

truckinwagen · « **Reply #1 on:** February 01, 2010, 02:19:26 pm »

11 or 12mm headbolts?

truckinwagen · « **Reply #2 on:** February 01, 2010, 09:51:38 pm »

mech heads can be 11 or 12mm

the lack of the extra oil drain makes it a mech head, but doesn't tell you if it is an 11 or 12mm head.

pics would clear it up though

-Owen

hustonr123 · « **Reply #3 on:** February 10, 2010, 04:23:00 pm »

how much shipped to 17233 Im in pa the snow has been horrible here also almost 4 ft in a week

dash cunning · « **Reply #4 on:** March 02, 2010, 05:29:42 am »

ever find out if they were 11 or 12mm heads? i need an 11mm one.

Dallas · « **Reply #5 on:** May 12, 2010, 07:33:28 pm »

Do you still have one of the heads? If so, I may be interested.

Krazy · « **Reply #6 on:** July 08, 2010, 08:18:22 am »

stick a 12 mm bolt in a bolt hole. If it fits, it is a 12 mm head. If it doesn't, it is a 11 mm head. I just removed a head bolt from a 12 mm block and one of the head bolts was threaded into one one hole in the head. I hope this helps.

pyro7890 · « **Reply #7 on:** July 10, 2010, 03:41:03 pm »

can you put some more pictures on

Author Topic: SOLDSOLDSOLD (Read 5169 times)

ObscuredByClouds

SOLDSOLDSOLD

truckinwagen

Re: 1.6 N/A cylinder heads

truckinwagen

Re: 1.6 N/A cylinder heads

hustonr123

Re: 1.6 N/A cylinder heads

dash cunning

Re: 1.6 mechanical cylinder heads (PICS ADDED)

Dallas

Re: 1.6 mechanical cylinder heads (PICS ADDED)

Krazy

Re: 1.6 mechanical cylinder heads (PICS ADDED)

pyro7890

Re: 1.6 mechanical cylinder heads (PICS ADDED)