« previous next »
Pages: [1]

Author Topic: FS: aaz intake manifold neck  (Read 4650 times)

January 22, 2010, 05:46:23 pm

midwestfalia

  • User+
  • Offline
  • *
  • 34
FS: aaz intake manifold neck
« on: January 22, 2010, 05:46:23 pm »
I have a manifold neck with vacuum nipple from a canadian aaz car.  Its in like new condition.  Make offer





Logged
82 diesel aba westy, 89 westy, 98 TDI
Reply #1January 22, 2010, 06:07:58 pm

GEE-BEE

  • Veteran
  • Offline
  • ***
  • 1604
  • Personal Text
    1981 with South African front end ,42 k original
Re: FS: aaz intake manifold neck
« Reply #1 on: January 22, 2010, 06:07:58 pm »
I make the silicone gasket for that !

Need one ?

let me now?

Freebie !

GB
Logged
1.9 AAZ, CHD 5spd with Peloquin
KO4/KO3 Hybrid turbo
Giles Pump OHC
Complete Techtonics 2'5 S/S DP and Exhaust
Coilovers, MKII Pedal Swap,G60 BRAKES
MK1 JETTA DASH
675MM 16V radiator (MKII) PASSAT DUAL FAN
42K original miles , South African Front End
15x6 Le Casletts 195-45-15
Reply #2January 23, 2010, 07:34:22 am

Rabbit on Roids

  • Guest
Re: FS: aaz intake manifold neck
« Reply #2 on: January 23, 2010, 07:34:22 am »
lol @ ^ ^ ^
Logged
Reply #3January 23, 2010, 07:51:57 am

dieselherb1

  • Veteran
  • Offline
  • ***
  • 354
Re: FS: aaz intake manifold neck
« Reply #3 on: January 23, 2010, 07:51:57 am »
$10
Logged
Reply #4January 23, 2010, 02:42:16 pm

midwestfalia

  • User+
  • Offline
  • *
  • 34
Re: FS: aaz intake manifold neck
« Reply #4 on: January 23, 2010, 02:42:16 pm »
I'd like to get $20 shipped for it.  I spent a half hour with a brass wire brush getting the thing to look new again and then went a different route.  Let me know

Dave
Logged
82 diesel aba westy, 89 westy, 98 TDI
Reply #5January 23, 2010, 04:27:45 pm

foxracer1

  • Authorized Vendor
  • Veteran
  • Offline
  • ***
  • 991
Re: FS: aaz intake manifold neck
« Reply #5 on: January 23, 2010, 04:27:45 pm »
What is the diameter of the inlet?
Logged
84 4dr Rabbit 1.6 N/A sold to friend
86 Jetta TD getting raced out AHU 02A
98 Jetta TDI Malone tune stg 3
91 S10 305 TPI T56
86 S10 2WD Prerunner project.


Now offering turbo rebuilds. HP or stock. Any turbo you have i can rebuild it for ya.
Reseal injection pumps PM for det
Reply #6January 23, 2010, 04:34:54 pm

GEE-BEE

  • Veteran
  • Offline
  • ***
  • 1604
  • Personal Text
    1981 with South African front end ,42 k original
Re: FS: aaz intake manifold neck
« Reply #6 on: January 23, 2010, 04:34:54 pm »
The size of the Duct to turbo to manifold  is 1.87 to 2.25 to manifold

so it's 2.25 inlet O.D.

I have this replacement silicone duct in production
Logged
1.9 AAZ, CHD 5spd with Peloquin
KO4/KO3 Hybrid turbo
Giles Pump OHC
Complete Techtonics 2'5 S/S DP and Exhaust
Coilovers, MKII Pedal Swap,G60 BRAKES
MK1 JETTA DASH
675MM 16V radiator (MKII) PASSAT DUAL FAN
42K original miles , South African Front End
15x6 Le Casletts 195-45-15
Reply #7January 23, 2010, 05:11:57 pm

foxracer1

  • Authorized Vendor
  • Veteran
  • Offline
  • ***
  • 991
Re: FS: aaz intake manifold neck
« Reply #7 on: January 23, 2010, 05:11:57 pm »
The one on my 1.6 is a little less than 2" and i'm running 2" piping for my intercooler and wondered if it was any larger. I'll probably just tig a piece of 2" aluminum to my current elbow. Not sure yet.
Logged
84 4dr Rabbit 1.6 N/A sold to friend
86 Jetta TD getting raced out AHU 02A
98 Jetta TDI Malone tune stg 3
91 S10 305 TPI T56
86 S10 2WD Prerunner project.


Now offering turbo rebuilds. HP or stock. Any turbo you have i can rebuild it for ya.
Reseal injection pumps PM for det
Reply #8January 31, 2010, 11:25:38 am

midwestfalia

  • User+
  • Offline
  • *
  • 34
Re: FS: aaz intake manifold neck
« Reply #8 on: January 31, 2010, 11:25:38 am »
still available
Logged
82 diesel aba westy, 89 westy, 98 TDI
Pages: [1]
« previous next »