measurements/drawings of 1.6td /AAZ Manifold - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• measurements/drawings of 1.6td /AAZ Manifold by mr.mtdi on 22 Jan, 2010 09:24
• I need the measuremnets for the turbo flange and the angle between inlet and outlet of this manifold for drwinging an adapter for another turbo. important measurement of the outlet are: outlet bore diameter, offset between atachment threads and thread diameter.
  regards
  michael
  
  
  
• #1 by foxracer1 on 23 Jan, 2010 17:23
• Someone has a cad drawing of this said info. I don't have a mani laying around or i'd measure it for ya. Can't remember the thread that had the diagram and specs in it.
• #2 by theman53 on 23 Jan, 2010 18:14
• I am almost sure that the threads in the mani are 10mm-1.25 thread.
• #3 by truckinwagen on 23 Jan, 2010 18:50
• I have the CAD drawing of the trapezoidal flange if you want it, PM me your email and I will send it to you.
  
  -Owen
• #4 by mr.mtdi on 24 Jan, 2010 08:04
• Quote from: truckinwagen on 23 Jan, 2010 18:50

  I have the CAD drawing of the trapezoidal flange if you want it, PM me your email and I will send it to you.
  
  -Owen
  

  
  you have a PM
  thx to everybody
  michael