Author Topic: measurements/drawings of 1.6td /AAZ Manifold (Read 2604 times)

mr.mtdi · « **on:** January 22, 2010, 09:24:07 am »

I need the measuremnets for the turbo flange and the angle between inlet and outlet of this manifold for drwinging an adapter for another turbo. important measurement of the outlet are: outlet bore diameter, offset between atachment threads and thread diameter.
regards
michael

foxracer1 · « **Reply #1 on:** January 23, 2010, 05:23:48 pm »

Someone has a cad drawing of this said info. I don't have a mani laying around or i'd measure it for ya. Can't remember the thread that had the diagram and specs in it.

theman53 · « **Reply #2 on:** January 23, 2010, 06:14:44 pm »

I am almost sure that the threads in the mani are 10mm-1.25 thread.

truckinwagen · « **Reply #3 on:** January 23, 2010, 06:50:25 pm »

I have the CAD drawing of the trapezoidal flange if you want it, PM me your email and I will send it to you.

-Owen

mr.mtdi · « **Reply #4 on:** January 24, 2010, 08:04:53 am »

Quote from: truckinwagen on January 23, 2010, 06:50:25 pm

I have the CAD drawing of the trapezoidal flange if you want it, PM me your email and I will send it to you.

-Owen

you have a PM
thx to everybody
michael

Author Topic: measurements/drawings of 1.6td /AAZ Manifold (Read 2604 times)

mr.mtdi

measurements/drawings of 1.6td /AAZ Manifold

foxracer1

Re: measurements/drawings of 1.6td /AAZ Manifold

theman53

Re: measurements/drawings of 1.6td /AAZ Manifold

truckinwagen

Re: measurements/drawings of 1.6td /AAZ Manifold

mr.mtdi

Re: measurements/drawings of 1.6td /AAZ Manifold