« previous next »
Pages: [1]

Author Topic: possible gauge issue?  (Read 1882 times)

January 17, 2010, 06:40:51 pm

chrisg

  • Junior
  • Offline
  • **
  • 72
possible gauge issue?
« on: January 17, 2010, 06:40:51 pm »
so my fuel gauge has been out of commision since i got my '90 N/A diesel. i've yet to take out the sending unit to inspect but before i do that i was looking in my bently and looking over some wiring diagrams when i noticed that there is a wire used for the water separator also is labeled with "fuel gauge sender"

now the PO of my car has removed the water separator and i was wondering if after they removed it they left a loose ground would this cause the fuel gauge to not function? could the fix simply be to fix the ground?
Logged
Reply #1January 17, 2010, 06:55:46 pm

burn_your_money

  • Global Moderator
  • Veteran
  • Offline
  • ***
  • 8999
  • Personal Text
    Bright, On
Re: possible gauge issue?
« Reply #1 on: January 17, 2010, 06:55:46 pm »
The water separator has 2 wires going to it. You snip those and that's all there is to it. It should have zero effect on the sending unit. I'm not saying the PO didn't mess it up though.
Logged
Tyler
Reply #2January 17, 2010, 07:13:32 pm

chrisg

  • Junior
  • Offline
  • **
  • 72
Re: possible gauge issue?
« Reply #2 on: January 17, 2010, 07:13:32 pm »
this is what made me think of it... page is 106 of current flow diagrams in the A2 bentley
Logged
Reply #3January 17, 2010, 08:11:18 pm

chrisg

  • Junior
  • Offline
  • **
  • 72
Re: possible gauge issue?
« Reply #3 on: January 17, 2010, 08:11:18 pm »
never mind. stupid me i was looking at the wrong model year.
Logged
Pages: [1]
« previous next »