Author Topic: 02A CTN tranny swap ~45k miles w/ clutch kit Clutchnet VR6  (Read 3468 times)

January 08, 2010, 10:07:01 am

X@V

  • Veteran

  • Offline
  • ***

  • 1002
02A CTN tranny swap ~45k miles w/ clutch kit Clutchnet VR6
« on: January 08, 2010, 10:07:01 am »
Hi,

I bought this kit from RedRotors 3 years ago.

It has about 70000km only (like new)

02A CTN from a '98 Jetta TDI

Comes with the starter, shifter, linkages, clutch slave cylinder, VSS (MK4)

The clutch kit: single mass flywheel from a MK3 TDI + Clutchnet 4-spuck spring disc + VR6 pressure plate, less than 20000km (12000miles)

I'm selling it because I bought a PD150 ARL engine + mods and I will buy a 6-speed tranny.

I'm asking $900 + shipping.


Jetta MK3 coupe: new project, 2.0 16V TDI BKD, R1287, ARL conn rods, GTB2260VK, FMIC, etc... (build-up very soon)

Be patient with me, english is not my first language!

Reply #1January 10, 2010, 10:57:22 am

X@V

  • Veteran

  • Offline
  • ***

  • 1002
Re: 02A CTN tranny swap ~45k miles w/ clutch kit Clutchnet VR6
« Reply #1 on: January 10, 2010, 10:57:22 am »
Up! Very low mileage!
Jetta MK3 coupe: new project, 2.0 16V TDI BKD, R1287, ARL conn rods, GTB2260VK, FMIC, etc... (build-up very soon)

Be patient with me, english is not my first language!

Reply #2January 16, 2010, 12:44:17 pm

X@V

  • Veteran

  • Offline
  • ***

  • 1002
Re: 02A CTN tranny swap ~45k miles w/ clutch kit Clutchnet VR6
« Reply #2 on: January 16, 2010, 12:44:17 pm »
Bump!
Jetta MK3 coupe: new project, 2.0 16V TDI BKD, R1287, ARL conn rods, GTB2260VK, FMIC, etc... (build-up very soon)

Be patient with me, english is not my first language!