Author Topic: Injection Pump: Non Turbo pump on a turbo head (Read 3934 times)

vanagondiesel · « **on:** October 19, 2005, 01:20:55 pm »

So what kind of tweeking do I need to do using a non turbo pump on a turbo head setup?

1.6 l 86 A-2 head on a 83 Pickup :roll:

Maarten · « **Reply #1 on:** October 19, 2005, 04:24:49 pm »

AFAIK it fits.. but you'll lose the fuel enrichment under boost (LDA mushroom on top of the punp)

vanagondiesel · « **Reply #2 on:** October 19, 2005, 07:46:26 pm »

I have a 90 hydrolic head complete A-2 motor I pulled (1.6 non turbo) from a junker a few months back...

That specific pump has that tower, and several ports, one which is on the tower. I assume, THAT pump would work properly if connected to the vac port on the intake of the turbo head..,.

btw, I chickened out.... :oops: and pulled the turbo head, and put the standard solid lifter head back on today.

A new BOSCH pump is due in any day now....

vwmike · « **Reply #3 on:** October 20, 2005, 03:21:52 am »

I'm confused.

vanagondiesel · « **Reply #4 on:** October 20, 2005, 02:19:55 pm »

I have a standard 1.6 non turbo, complete with the standard pump

I want to put a turbo head on it, complete setup, what kind of tweeks does the standard injection pump need to make it run

or do I need a newer style pump