Beautiful fab work. What size external wastegate is that? What kind of boost and EMP's do you see? Are you planning on swapping the small turbo out for a vnt?
I just replaced my small turbo with a VNT 17/22 and refabed every thing. I built this fancy lever that reverses the direction of the VNT control because I am using a boost actuator and not the vacuum actuator (MTDI). Any way to make a long story short I learned the hard way that I didn't need to reverses the direction of the lever. I went for a test run and it made very little boost (because the vanes were open instead of closed) until my second turbo made about 15 psi and moved the boost actuator to the closed position and the boost came on very strong and fast (50+psi) and I destroyed my new turbo. I broke the shaft in half and damaged both wheels. The turbo is getting rebuilt and I should have it all put together by the end of the month.
I have lots of new pictures that I will post as well. This time I am going to do some VNT control R & D before I bolt on the second turbo.
I will keep you posted.
Can i come up and see this car?