Author Topic: vw engine, caddy, rabbit parts, lifter shim kit  (Read 7410 times)

November 07, 2009, 06:26:35 pm

Justin

  • Veteran

  • Offline
  • ***

  • 455
vw engine, caddy, rabbit parts, lifter shim kit
« on: November 07, 2009, 06:26:35 pm »
going to finally part ways with the Caddy in a week or two and have the following parts that I need to get rid of if you are interestedin a caddy please pm me for details or check out the thread that I will be getting around for it.

parts are as follows, followed by price, everything is plus shipping and OBO with discounts for multiple buys
lifter shim kit as follows 1x3.4, 1x3.5, 5x3.55, 16x3.6, 17x3.65, 18x3.7, 19x3.75, 11x3.8, 10x3.85, 1x3.9 comes with 5 lifter buckets for $40
2 sets of IDI mechanical valves, one set fresh regrind, with two sets of used springs, keepers and locks $10
Lightened 020 flywheel with good slightly used clutch and pressure plate $50
4 speed GN transmission $40
after cooler about 12 inches x 8 inches needs some holes fixed $10 aluminum
new std co-fab piston rings for 1.5 or 1.6, $15
Caddy Slider Window assembly $100 new price of $40 with used gasket due to neglegence on my part
Caddy Solid Rear Glass and gasket $40 Cannot find, see price adjustment on slider glass due to mistake
set of chrome trim rings and hubcaps for 13" rims $50 for set and any extras I have laying around (I think I have 2 or 3 extra hubcaps)
2 door polished aluminum window trim and gaskets for doors only $10)
two 020 diesel starters $20 each both work
std set of 1.5 or 1.6 pistons and rods (I will check if interested) $15 used but in good shape
two rabbit windshield wiper motors $10 each (both work)
Caddy Topper, raised fiberglass, rear window needs replacing has plywood for time being $100 (pick up only)

pm me if you are intersted in any of this, I prefer paypal but other methods of payment are accepted as well and pickup is available on all parts
Thanks for looking,
Justin
« Last Edit: November 10, 2009, 07:49:55 pm by Justin »
www.archeryprostaffmi.com
1985 GMC pickup 4x4 lift kit and runs 14.625 @ 91mph
1982 VW rabbit pickup 1.6L just rebuilt, 100mm cv's, 02A transmission
1997 Geo Tracker 1.9 TDI-M, variable gate turbo, Giles Pump

Reply #1November 07, 2009, 06:49:39 pm

Possum79

  • Veteran

  • Offline
  • ***

  • 276
    • http://www.poscarclub.com
Re: vw engine, caddy, rabbit parts, lifter shim kit
« Reply #1 on: November 07, 2009, 06:49:39 pm »
PM sent about the shim kit.
1979 VW Rabbit Diesel L
My car may be ugly but im addicted to it.

Reply #2November 07, 2009, 07:44:01 pm

Justin

  • Veteran

  • Offline
  • ***

  • 455
Re: vw engine, caddy, rabbit parts, lifter shim kit
« Reply #2 on: November 07, 2009, 07:44:01 pm »
also have a new 020 shift ball and 4 speed main swing arm (round stock with 4-5" long peice of steel with ball on end and shift ball bolts to on key-wayed end) with a new 020 bushing kit that anyone can have all of it for $10 with same terms as above.
two cable shift clutch cables one used, one new in bag $5 and $15 respectively (sorry I meant clutch cables for O2O transmissions)
« Last Edit: November 10, 2009, 07:47:35 pm by Justin »
www.archeryprostaffmi.com
1985 GMC pickup 4x4 lift kit and runs 14.625 @ 91mph
1982 VW rabbit pickup 1.6L just rebuilt, 100mm cv's, 02A transmission
1997 Geo Tracker 1.9 TDI-M, variable gate turbo, Giles Pump

Reply #3November 09, 2009, 05:45:38 pm

Justin

  • Veteran

  • Offline
  • ***

  • 455
Re: vw engine, caddy, rabbit parts, lifter shim kit
« Reply #3 on: November 09, 2009, 05:45:38 pm »
ttt, if you want pitures on anything let me know and I can email them. and feel free to make an offer
www.archeryprostaffmi.com
1985 GMC pickup 4x4 lift kit and runs 14.625 @ 91mph
1982 VW rabbit pickup 1.6L just rebuilt, 100mm cv's, 02A transmission
1997 Geo Tracker 1.9 TDI-M, variable gate turbo, Giles Pump

Reply #4November 09, 2009, 08:26:43 pm

rabbitman

  • Veteran

  • Offline
  • ***

  • 2788
Re: vw engine, caddy, rabbit parts, lifter shim kit
« Reply #4 on: November 09, 2009, 08:26:43 pm »
PM sent about a starter.....
'82 Rabbit, I put on a euro vnt-15, 2.25" DP, 2.5" exhaust, the result.....it whistled.

I removed the turbo, made a toilet bowl 2.5" DP, the result....it was deafening. Now it has a homemade muffler up front and a thrush in the rear, the result.....less loud.
Watch: AGENDA, GRINDING AMERICA DOWN

Reply #5November 09, 2009, 08:42:47 pm

Justin

  • Veteran

  • Offline
  • ***

  • 455
Re: vw engine, caddy, rabbit parts, lifter shim kit
« Reply #5 on: November 09, 2009, 08:42:47 pm »
www.archeryprostaffmi.com
1985 GMC pickup 4x4 lift kit and runs 14.625 @ 91mph
1982 VW rabbit pickup 1.6L just rebuilt, 100mm cv's, 02A transmission
1997 Geo Tracker 1.9 TDI-M, variable gate turbo, Giles Pump

Reply #6November 09, 2009, 08:43:03 pm

Justin

  • Veteran

  • Offline
  • ***

  • 455
Re: vw engine, caddy, rabbit parts, lifter shim kit
« Reply #6 on: November 09, 2009, 08:43:03 pm »
www.archeryprostaffmi.com
1985 GMC pickup 4x4 lift kit and runs 14.625 @ 91mph
1982 VW rabbit pickup 1.6L just rebuilt, 100mm cv's, 02A transmission
1997 Geo Tracker 1.9 TDI-M, variable gate turbo, Giles Pump

Reply #7November 11, 2009, 07:18:07 pm

Justin

  • Veteran

  • Offline
  • ***

  • 455
Re: vw engine, caddy, rabbit parts, lifter shim kit
« Reply #7 on: November 11, 2009, 07:18:07 pm »
lifter shim kit spoken for
starters spoken for
glass spoken for,  time being

thanks for looking
www.archeryprostaffmi.com
1985 GMC pickup 4x4 lift kit and runs 14.625 @ 91mph
1982 VW rabbit pickup 1.6L just rebuilt, 100mm cv's, 02A transmission
1997 Geo Tracker 1.9 TDI-M, variable gate turbo, Giles Pump

Reply #8November 16, 2009, 04:39:38 pm

Justin

  • Veteran

  • Offline
  • ***

  • 455
Re: vw engine, caddy, rabbit parts, lifter shim kit
« Reply #8 on: November 16, 2009, 04:39:38 pm »
feel free to make offers, below are the only things that are/have been moving

lifter shim kit spoken for
starters sold

thanks for looking
www.archeryprostaffmi.com
1985 GMC pickup 4x4 lift kit and runs 14.625 @ 91mph
1982 VW rabbit pickup 1.6L just rebuilt, 100mm cv's, 02A transmission
1997 Geo Tracker 1.9 TDI-M, variable gate turbo, Giles Pump

Reply #9November 18, 2009, 08:17:10 pm

Justin

  • Veteran

  • Offline
  • ***

  • 455
Re: vw engine, caddy, rabbit parts, lifter shim kit
« Reply #9 on: November 18, 2009, 08:17:10 pm »
feel free to make offers, below are the only things that are/have been moving

lifter shim kit is available as potential buyers have backed out
starters sold

thanks for looking
www.archeryprostaffmi.com
1985 GMC pickup 4x4 lift kit and runs 14.625 @ 91mph
1982 VW rabbit pickup 1.6L just rebuilt, 100mm cv's, 02A transmission
1997 Geo Tracker 1.9 TDI-M, variable gate turbo, Giles Pump

Reply #10December 06, 2009, 12:47:12 am

rabbitman

  • Veteran

  • Offline
  • ***

  • 2788
Re: vw engine, caddy, rabbit parts, lifter shim kit
« Reply #10 on: December 06, 2009, 12:47:12 am »
Monday will be 3 weeks since I sent the MO, recently we've had some other stuff take a couple weeks so it's probably not too far overdue yet.....keep yer eyes open for it. :)

PS. My starter is really buggin' me, I think the new drivegear clutch is slipping.
'82 Rabbit, I put on a euro vnt-15, 2.25" DP, 2.5" exhaust, the result.....it whistled.

I removed the turbo, made a toilet bowl 2.5" DP, the result....it was deafening. Now it has a homemade muffler up front and a thrush in the rear, the result.....less loud.
Watch: AGENDA, GRINDING AMERICA DOWN

Reply #11December 07, 2009, 06:03:50 am

Justin

  • Veteran

  • Offline
  • ***

  • 455
Re: vw engine, caddy, rabbit parts, lifter shim kit
« Reply #11 on: December 07, 2009, 06:03:50 am »
Rabbitman,

I have been anxiously checking the mailbox daily and have not recieved the MO yet. I do believe that with the holidays and such that the trip from AK to MI will help explain it. like I said the two starters and spare solenoid are still yours and waiting for the payment to arrive.

thanks for staying in touch about it and I will let you know as soon as I see the MO show up. its weird to because it seems as though when people send us thank you and christmas cards it can take 2-3 weeks for a town thats 1.5 hours away so I agree that the mail has been screwy lately. with the USPS the only reliable thing it seems is the flat rate boxes.

later
jkeiffer
www.archeryprostaffmi.com
1985 GMC pickup 4x4 lift kit and runs 14.625 @ 91mph
1982 VW rabbit pickup 1.6L just rebuilt, 100mm cv's, 02A transmission
1997 Geo Tracker 1.9 TDI-M, variable gate turbo, Giles Pump

Reply #12December 25, 2009, 10:26:39 pm

rabbitman

  • Veteran

  • Offline
  • ***

  • 2788
Re: vw engine, caddy, rabbit parts, lifter shim kit
« Reply #12 on: December 25, 2009, 10:26:39 pm »
Man this is crazy I forgot all about it.

I've fixed my starter so I'm not in a big hurry anymore but you know, it's nice to pay and then get stuff rather than just pay and get nothing ::)

I'll be waiting.........
'82 Rabbit, I put on a euro vnt-15, 2.25" DP, 2.5" exhaust, the result.....it whistled.

I removed the turbo, made a toilet bowl 2.5" DP, the result....it was deafening. Now it has a homemade muffler up front and a thrush in the rear, the result.....less loud.
Watch: AGENDA, GRINDING AMERICA DOWN

Reply #13December 27, 2009, 06:16:35 am

ktzdsl

  • Junior

  • Offline
  • **

  • 73
Re: vw engine, caddy, rabbit parts, lifter shim kit
« Reply #13 on: December 27, 2009, 06:16:35 am »
PM sent.
DFW area Texas
1982 1.6L NA diesel pickup

Reply #14December 28, 2009, 10:18:07 pm

Justin

  • Veteran

  • Offline
  • ***

  • 455
Re: vw engine, caddy, rabbit parts, lifter shim kit
« Reply #14 on: December 28, 2009, 10:18:07 pm »
Man this is crazy I forgot all about it.

I've fixed my starter so I'm not in a big hurry anymore but you know, it's nice to pay and then get stuff rather than just pay and get nothing ::)

I'll be waiting.........

I agree, it would be nice but I have not seen a money order show up in the mail so I honestly do not know what to tell you. I look everyday as does my wife. I still have the two starters and extra solenoid setting on the shop floor with your name on them.

if the money order shows up I will ship them out the next day.
later
jkeiffer
www.archeryprostaffmi.com
1985 GMC pickup 4x4 lift kit and runs 14.625 @ 91mph
1982 VW rabbit pickup 1.6L just rebuilt, 100mm cv's, 02A transmission
1997 Geo Tracker 1.9 TDI-M, variable gate turbo, Giles Pump