-
Make an offer!
by
truckinwagen
on 18 Sep, 2009 15:17
-
All gone!
-Owen
-
#1
by
truckinwagen
on 25 Sep, 2009 14:08
-
Bump.
-
#2
by
truckinwagen
on 25 Sep, 2009 17:03
-
All Gone!
-Owen
-
#3
by
Emerald Energy
on 29 Sep, 2009 07:05
-
Hey, Would the K03's fit on a stock 1.6L TD mainfold?
-
#4
by
truckinwagen
on 29 Sep, 2009 12:11
-
unfortunately no, the only manifold they bolt up to is the 1.8T(20 valve) so a custom manifold or adapter would have to be made to use one.
but they would assuredly boost nice and low! and are apparently good to 20 PSI or so
-
#5
by
Justin
on 30 Sep, 2009 04:32
-
please PM me back about the injection pump brakets as i am interested in purchasing them and shipped to zip 49460.
Thanks,
Justin
-
#6
by
truckinwagen
on 30 Sep, 2009 14:51
-
I also have a TDI injection pump sprocket, for the large diameter, long nose TDI pumps.
-Owen
-
#7
by
snuggle.pants
on 30 Sep, 2009 18:31
-
will the 1.6 td intake fit a 1.9tdi? I am swapping a tdi(no ECM) into a Westy and am looking for an intake to make the install a little cleaner.
Reards, David K
-
#8
by
truckinwagen
on 30 Sep, 2009 18:35
-
yes the intake will bolt up, but the TDI has D shaped ports while the one I have has O shaped ports.
the manifold will bolt up, but the ports wont match all that well.
this can be fixed by some porting(you might have to add some material to the manifold to get it to match perfectly)
and I think I can fit the manifold into a $13 flatrate box, so a tentative $13 for shipping on it.
-Owen
-
#9
by
Familydiesel
on 04 Oct, 2009 20:51
-
Do you still have the 1.6 td intake manifold?
I'm interested. What is it to ship to 98932?
Greg
-
#10
by
truckinwagen
on 05 Oct, 2009 11:27
-
anyone who wants some of this stuff should hurry up and PM me.
I cant have this stuff in the back of my car too much longer, so it will start disappearing other ways.
(ebay and the like)
-Owen
-
#11
by
truckinwagen
on 08 Oct, 2009 17:07
-
added to the list of available parts is an adapter I made to use a gasser manifold.
it bolts up where the throttle body would go and allows for the connection of an air filter or 2.5" boost piping.
it has a 1/8" pipe tapped hole that I was going to use for my water/meth injection, but it could easily be plugged.
the welds could probably stand to be cleaned up a little.
-Owen
-
#12
by
truckinwagen
on 14 Oct, 2009 15:30
-
Bump!
Need this stuff gone!
all prices are now offer, make an offer, if no one offers more in the same day the parts are yours!
-Owen
-
#13
by
Justin
on 25 Oct, 2009 16:39
-
do you have a vacuum pump for a 1.5 or 1.6? I have not been able to find mine yet.
-
#14
by
truckinwagen
on 26 Oct, 2009 13:37
-
let me look and get back to you,
-Owen