-
WTB piston rod and Passat oil filter flange
by
turbosuzi
on 04 Aug, 2009 11:17
-
I need a cast iorn vac pump and a 1.6td std rod bearing cap.
I live inCalifornia and my zip code is 93614.
I forgot, I also am in need of an angled oil filter housing.
-
#1
by
burn_your_money
on 04 Aug, 2009 12:19
-
I have the vac pump you need, and if you need a non turbo oil filter flange then I have one of those as well
-
#2
by
Rabbit on Roids
on 04 Aug, 2009 17:32
-
i think he means the angled oil filter flange off a van or something.
every other flange ive seen sits at a right angle to the face of the block.
-
#3
by
burn_your_money
on 04 Aug, 2009 18:04
-
In that case I can`t be of assistance. I do still have the vacuum pump if it`s the same though...
-
#4
by
Rabbit on Roids
on 05 Aug, 2009 10:51
-
You really shouldn't replace just the rod cap. They are matched to the rod. You should replace the entire rod if the cap is a problem.
Andrew
i always thought they were kinda a matched set too.
by the way, how did you just loose or mess up just the rod cap?
-
#5
by
turbosuzi
on 05 Aug, 2009 17:37
-
Oil filter blewout and lost all oil , enging seized crank shaft was toast, allthe rods and caps are reusable but I mangled one cap while removing it.
I already got the vac pump.
Does anyone have an extra rod available?
I do need the oilfilter adapter for a longitudinal motor it is for my brothers samurai.
Thanks guys.
-
#6
by
Rabbit on Roids
on 06 Aug, 2009 11:53
-
good luck getting the Audi/quantum filter flange.
-
#7
by
turbosuzi
on 06 Aug, 2009 13:18
-
I got one from a Passat, but cant find another for my brother.
-
#8
by
dieselherb1
on 06 Aug, 2009 22:19
-
I just happened to have a Quantum (angled) oil filter mount. How much is it worth to you? I know they are hard to come by.
-
#9
by
turbosuzi
on 07 Aug, 2009 01:51
-
I believe I paid $15.00 for mine. Is that agreeable to you plus shipping to 93614 Clifornia?
And I am still looking for a good piston rod.
-
#10
by
turbosuzi
on 10 Aug, 2009 00:49
-
No extra piston rods lying arround?
-
#11
by
dieselherb1
on 10 Aug, 2009 07:55
-
I'll look for a rod
-
#12
by
turbosuzi
on 10 Aug, 2009 20:06
-
How does $30.00 plus shipping sound for a rod and the angled flange?
-
#13
by
turbosuzi
on 11 Aug, 2009 19:32
-
Bump.
sorry to be a pain but school starts in a two weeks and I need the connecting rod to put the 1.6 back together for school.
-
#14
by
dieselherb1
on 11 Aug, 2009 20:10
-
Okay I found them and $30+ sounds good. Send me a PM with your address, I'll check shipping.
Herb