« previous next »
Pages: [1]

Author Topic: Where's a good place for the EGT probe on a VNT 15 manifold?  (Read 1992 times)

July 30, 2009, 10:42:45 pm

fatmobile

  • Veteran
  • Offline
  • ***
  • 2922
    • http://www.geocities.com/vwfatmobile/
Where's a good place for the EGT probe on a VNT 15 manifold?
« on: July 30, 2009, 10:42:45 pm »
 Can anyone suggest a good place to put the EGT probe on the VNT?
 The one with the built-in manifold, off a TDI.
Logged
Tornado red, '91 Golf 4 door, with M-TDI 12mm pump, south bend clutch, VNT-15 turbo, 02A trany
MK4s: 2000 TDI jetta, 2003 TDI wagon, 2000 golf 2.0 gasser.
'84 Rabbit with 1.7TD KY block pistons bored to 80mm, VNT-15
'84 GTI with stock 1.6TD starion intercooler.
Reply #1July 31, 2009, 06:51:42 pm

dieseltech

  • Junior
  • Offline
  • **
  • 129
    • http://www.geocities.com/dean16v/Page_One.html
Re: Where's a good place for the EGT probe on a VNT 15 manifold?
« Reply #1 on: July 31, 2009, 06:51:42 pm »
where the runners meet the turbo just before the turbo, make sure you have clearance before u drill.
Logged
86 td jetta power everything dd (update off the road for major resto).  97tdi bare bones, DD
and a private junkyard of various other vw/audi/bmw/peugeot/volvo/toyota diesels!!!
Cummins has the worlds record for being the most efficient engine ever!!!!!
for converting fuel into noise!
Pages: [1]
« previous next »