« previous next »
Pages: 1 [2]

Author Topic: Coolant T at the head thing  (Read 3646 times)

Reply #15March 16, 2009, 05:44:53 am

arb

  • Guest
Coolant T at the head thing
« Reply #15 on: March 16, 2009, 05:44:53 am »
I've only seen them made out of aluminum...

Logged
Reply #16June 09, 2009, 08:40:28 am

92EcoDiesel Jetta

  • Guest
Re: Coolant T at the head thing
« Reply #16 on: June 09, 2009, 08:40:28 am »
Quote from: clbanman on March 16, 2009, 03:21:48 am
037-121-144H picture

The one I got from Germanautparts.com ($4.41 hose flange, upper rad hose) looks just like yours but has a different p/n. I found it over the phone by talking to the sales rep. It is not in their online catalog (per the rep) since it's in short supply. It's made by Meyle p/n 068.121.132

The bolt holes has metal bushing inserts so you can't really over tighten and bend or crack the plastic. The o-ring sits in a recess on the flange so I do not understand the comments about sanding it flat???

Logged
Reply #17June 09, 2009, 10:51:46 am

arb

  • Guest
Re: Coolant T at the head thing
« Reply #17 on: June 09, 2009, 10:51:46 am »
Yeah, if its got an Oring, sanding will not work. O-rings rely on the squish in the groove. NASA learned about this the hard way ;-)  Mine were always aluminum and never leaked (stock gasket with a thin layer of Permitex or RTV on both sides)
Logged
Pages: 1 [2]
« previous next »