Hoping someone could shed some light on this.
Found 4 NA13X injectors for a 1.6NA...they were remanufactured by Bosch and have sleeve that wraps around the injectors where the VW part numbers are...the sleeve says NA13X so the right application for a 1981 engine.
I took the sleeves off cause they probably wouldn't survive on the engine forever and a found different VW part numbers on them: ending with: 201 C, 130 bar (as expected), a 201 B, 155 bar (turbo), and a 201 P, 155 bar (turbo).
I guess that since the bodies are the same between the different types of injectors that if they all have the nozzles specified for a 201 C then that is why they are all boxed and listed as NA13X. Does that make any sense?
Any thoughts/comments out there are really appreciated?
Thanks
Topic: NA13x injectors (Read 1847 times)
