Author Topic: Bought junk metal 1.9L headgasket (Read 3859 times)

theman53 · « **on:** May 04, 2009, 09:29:39 am »

Yeah, if any of you guys are running a metal head gasket and doing a headgasket change soon, could you send me the old one. I have a 1.6L that I want to drill the holes in the head and block, but I don't have a gasket yet. I don't have the pistons in to measure and don't want to order a gasket until then. Let me know and how much, hopefully just some cheap shipping.

burn_your_money · « **Reply #1 on:** May 04, 2009, 12:43:49 pm »

I have one if no one on your side of the border has one

theman53 · « **Reply #2 on:** May 04, 2009, 06:45:09 pm »

sweet. Maybe in a day or two if no one else says anything I will take you up on that. If that is the case I will call Giles and tell him to send the pump and injectors, and see if I can't get a flywheel and HG from you

theman53 · « **Reply #3 on:** May 05, 2009, 06:45:26 pm »

anyone in the US?

Powered by Spearco · « **Reply #4 on:** May 06, 2009, 12:41:39 am »

Yea, I got one. Three hole. Used for 50 miles.
If you want it, I'll get a shipping quote ASAP.
What's your zip code?

theman53 · « **Reply #5 on:** May 06, 2009, 08:16:18 am »

44654
I will send you my address later. I just want it to drill some holes. Thanks Lucas ><>

Powered by Spearco · « **Reply #6 on:** May 07, 2009, 01:47:14 pm »

PM sent.

Josh

theman53 · « **Reply #7 on:** May 07, 2009, 07:33:23 pm »

all taken care of .Thanks LUcas ><>

Author Topic: *Bought* junk metal 1.9L headgasket (Read 3859 times)

Author Topic: Bought junk metal 1.9L headgasket (Read 3859 times)