FS: NEW VW ADG 1.9L Industrial Diesel Engine - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• FS: NEW VW ADG 1.9L Industrial Diesel Engine by guru232 on 28 Apr, 2009 15:02
• The engine is new but has been in storage for a while. It is an industrial engine and makes 57.7HP @4000RPM. I have full spec sheets, curves, and pictures available upon request.
  
  The engine is set up as an open power unit with radiator, fan, muffler, control panel, air cleaner, SAE 4 flywheel housing and 10" flywheel.
  
  Please let me know if you are interested, we are asking $3,895 + shipping. This is a great price and less than a new engine costs.
  
  Thanks
• #1 by burn_your_money on 28 Apr, 2009 15:21
• I'm not interested in the engine but I would love to see the charts and papers that come along with it if you don't mind.
  
  raging_freestyler [at] hotmail.com
  
  Thanks
• #2 by guru232 on 28 Apr, 2009 16:02
• Is there any particular graph or spec that you are looking for? I don't have a digital copy so I have to scan every page...
• #3 by burn_your_money on 29 Apr, 2009 04:49
• Well if you have the hp/torque and fuel consumption graphs that's be great. If it's too much work though, don't worry about it.
• #4 by guru232 on 29 Apr, 2009 06:12
• I went ahead and scanned the whole spec sheet. The HP and fuel consumption curves are on the fourth page, it has the JG-4 injection pump equipped.
  
  You can download the full spec sheet from our website:
  
  http://www.ai-engines.com/download/VWadg.PDF
• #5 by burn_your_money on 29 Apr, 2009 09:46
• That's awesome. Thank you for taking the time to do that
• #6 by the caveman on 01 May, 2009 15:45
• Just to help you sell it, the later ADG's have piston oilers and the TDI style crank pulley and crankshaft. Possibly the best 1.9 liter IDI engine to use.
• #7 by spencebm on 01 May, 2009 21:30
• i am running an engine like this and it is nice
• #8 by jtanguay on 01 May, 2009 21:48
• Quote from: "spencebm"

  i am running an engine like this and it is nice

  
  
  stock? or did you need to adjust the pump any?
• #9 by the caveman on 02 May, 2009 12:58
• The pump would have to be replaced or changed to go into a vehicle. The head on mine was only 8mm and there were some weird governor springs.
• #10 by spencebm on 03 May, 2009 10:13
• ive run the pump for 3-4 years without issues, it is weird to get use to but it gets really good fuel economy and has lots of low end torque.  the only bad thing is that the governor springs will only allow so many rpm so i can only go 82-3mph with an acn trans.
• #11 by guru232 on 04 May, 2009 14:39
• Just wanted to say that this engine is still available if anyone is interested.