-
anyone have any pics of there aaz serpentine setup.
by
allsierra123
on 16 Apr, 2009 22:05
-
I am thinking my belt may be too short or I have it on wrong. Its not touching the water pump pulley at all.
-
#1
by
allsierra123
on 16 Apr, 2009 22:34
-
I think I may have got the belt for the non AC engine.
-
#2
by
flapjack
on 17 Apr, 2009 13:00
-
From what I've seen, you can't run AC and the waterpump with the serpentine belt.
If you run AC, then the waterpump shares a separate V belt with power steering.
-
#3
by
allsierra123
on 17 Apr, 2009 13:09
-
mine has the idler pulley on th water pump.
-
#4
by
flapjack
on 17 Apr, 2009 13:11
-
really? wow, in that case, can I have a picture of your setup?
what is that from?
-
#5
by
blackdogvan
on 17 Apr, 2009 13:15
-
-
#6
by
allsierra123
on 17 Apr, 2009 14:03
-
well the guy I bought the engine from told me he set it up for that. maybe he didnt do it right it does look similar though to that PDF except the power steering pump was the only belt running on the vw belt. The rest has the serpentine pulley's on them. its from a 96 aaz engine.
-
#7
by
allsierra123
on 17 Apr, 2009 14:04
-
I may have to take the AC off and worry about it at a later date.
-
#8
by
allsierra123
on 18 Apr, 2009 18:58
-
Ok today I removed the AC going to have to work out a setup later to use my ac without the power steering pump
-
#9
by
allsierra123
on 29 Apr, 2009 23:28
-
It actually has PS but its been Inop for a while do to the many many leaks from the front to back. The more I dig into this van the more I think someone ran it through some very rough terrain.
-
#10
by
allsierra123
on 30 Apr, 2009 00:39
-
Well Im gonna file nugget of info away. Im up to my rear end in wiring and hoses right now. But Im starting to see the light at the end of the tunnel with this conversion.