Author Topic: Timing delay prevention question (Read 2095 times)

Jeff@TheQuadShop · « **on:** September 02, 2005, 07:09:17 am »

Ok, I'm doing the mods to my 1.9TD. My question is, in this pic do I just need to run a wire from #4 to #3? My motor didn't have that switch #1 & #2.

andy2 · « **Reply #1 on:** September 02, 2005, 01:53:47 pm »

yep thats all you need to do.Just leave #4 plugged in and cut its wire it off so that it will reach #3.Then get a new female terminal to splice #3,#4 wires together.Done

Jeff@TheQuadShop · « **Reply #2 on:** September 03, 2005, 05:04:44 am »

Thanks!

Author Topic: Timing delay prevention question (Read 2095 times)

Jeff@TheQuadShop

Timing delay prevention question

andy2

Timing delay prevention question

Jeff@TheQuadShop

Timing delay prevention question