« previous next »
Pages: [1]

Author Topic: feeler:: SO MUCH STUFF for the 1.6l  (Read 5242 times)

April 19, 2009, 04:08:51 pm

Stumbc

  • Newbie
  • Offline
  • *
  • 1
feeler:: SO MUCH STUFF for the 1.6l
« on: April 19, 2009, 04:08:51 pm »
So I just picked up a 1984 diesel rabbit from my late neighbor. he was a great family friend and wanted me to have it since I always slobbered when he would show it to me. What I didn't know was HOW MANY PARTS HE HAD to go with it. the garage is FULL, so the is a feeler for who wants what and how much people offer.

I have way more than this, but I will give a general.

1 brand new 12mm head.
1 refurb 12mm head
3 used heads.
8 na injector pumps, some rebuilt some not.
40 injectors, mostly all ready to use.
over 2 valve train sets of springs, retainers, valves.
over 16 brand new valves.
5 rad fans
1 rad
4 cams
4 cam sprockets
5 oil sump pumps

and so SO much more.

If your in no rush to get the parts let me know so I can reserve the part for you, but until the shop is cleaned, and i can figure out what all i actually have. the parts wont be shipping out hence the feeler.
Logged
Reply #1April 19, 2009, 09:21:48 pm

kane66

  • Junior
  • Offline
  • **
  • 131
feeler:: SO MUCH STUFF for the 1.6l
« Reply #1 on: April 19, 2009, 09:21:48 pm »
I would be interested in a good set of injectors
Logged
1985 Jetta WBE
Reply #2April 19, 2009, 10:11:03 pm

Powered by Spearco

  • Veteran
  • Offline
  • ***
  • 1203
feeler:: SO MUCH STUFF for the 1.6l
« Reply #2 on: April 19, 2009, 10:11:03 pm »
Sent you a IM.
Thanks.
Logged
'87 Syncro Transporter Single Cab "Now TDI"
'78 Rabbit..Gas Weekend Racer
'81 Caddy..Diesel 1.6/1.9 TD hybrid 275HP 349TQ "Retired"
'90 MultiVan, 2.5 Suby Swap, Porsche Brakes
'76 Scirocco TD dragster project
'13 Golf R:. Tuned
'98 Puch G320
Reply #3January 21, 2010, 11:12:30 am

NintendoKD

  • Veteran
  • Offline
  • ***
  • 931
  • Personal Text
    dnahtasinoivilboeraweb
    • myspace page
Re: feeler:: SO MUCH STUFF for the 1.6l
« Reply #3 on: January 21, 2010, 11:12:30 am »
sending an IM in need of a cam sprocket from a 1.6 wondering if you still have it, and the required mounting hardware.
Logged
dnahtasinoivilboeraweb
you know, decarbonated beer is a better coolant than the stuff you buy at the auto store, and is better for you...... really
"If the boost were to rise then the throttle would remain in the wide-open throttle position, which might be fun, but probably not for long"Libbypapa
Reply #4January 21, 2010, 11:47:42 pm

Familydiesel

  • Junior
  • Offline
  • **
  • 154
Re: feeler:: SO MUCH STUFF for the 1.6l
« Reply #4 on: January 21, 2010, 11:47:42 pm »
IM sent.  Thanks.  Let me know.  If you didn't receive my message, post here and I'll resend.
« Last Edit: January 22, 2010, 09:37:53 am by Familydiesel »
Logged
1980 Diesel td pickup, Love that Diesel!
Reply #5January 22, 2010, 07:23:07 am

lovinthedeez

  • Veteran
  • Offline
  • ***
  • 489
Re: feeler:: SO MUCH STUFF for the 1.6l
« Reply #5 on: January 22, 2010, 07:23:07 am »
where in oregon are you at? :)
Logged
location:  ashland, oregon US
Reply #6February 02, 2010, 06:00:55 pm

riceatingrabbit

  • Junior
  • Offline
  • **
  • 89
Re: feeler:: SO MUCH STUFF for the 1.6l
« Reply #6 on: February 02, 2010, 06:00:55 pm »
message sent a while ago... no reply...
Logged
Reply #7February 02, 2010, 06:21:16 pm

NintendoKD

  • Veteran
  • Offline
  • ***
  • 931
  • Personal Text
    dnahtasinoivilboeraweb
    • myspace page
Re: feeler:: SO MUCH STUFF for the 1.6l
« Reply #7 on: February 02, 2010, 06:21:16 pm »
I'm still interested as well, I need a lot of stuff to make my 1.6 complete, as of right now, I just have a block and rotating assy.
Logged
dnahtasinoivilboeraweb
you know, decarbonated beer is a better coolant than the stuff you buy at the auto store, and is better for you...... really
"If the boost were to rise then the throttle would remain in the wide-open throttle position, which might be fun, but probably not for long"Libbypapa
Reply #8February 02, 2010, 06:29:45 pm

Dakotakid

  • Veteran
  • Offline
  • ***
  • 1240
Re: feeler:: SO MUCH STUFF for the 1.6l
« Reply #8 on: February 02, 2010, 06:29:45 pm »
Working fuel pumps?
Logged
The mask and the shot(s) are actually an IQ test. If you are wearing or circulating, you just failed the test. I can't feel sorry for you.
Reply #9February 02, 2010, 11:52:51 pm

monomer

  • Veteran
  • Offline
  • ***
  • 414
Re: feeler:: SO MUCH STUFF for the 1.6l
« Reply #9 on: February 02, 2010, 11:52:51 pm »
I'd like a 1.6 hydro cam
Logged
-1983 Rabbit LX 1.6/1.9 VNT build


Michigan Volkswagen Enthusiasts
www.michiganvw.org
Reply #10February 05, 2010, 06:46:14 pm

riceatingrabbit

  • Junior
  • Offline
  • **
  • 89
Re: feeler:: SO MUCH STUFF for the 1.6l
« Reply #10 on: February 05, 2010, 06:46:14 pm »
I have paypal and will buy one of the heads NOW...

email greg_3821(AT)yahoo.com


Logged
Reply #11February 05, 2010, 11:16:09 pm

Familydiesel

  • Junior
  • Offline
  • **
  • 154
Re: feeler:: SO MUCH STUFF for the 1.6l
« Reply #11 on: February 05, 2010, 11:16:09 pm »
Are you going to actually sell the parts?  Could you respond and give an update or should we look elsewhere?
Logged
1980 Diesel td pickup, Love that Diesel!
Reply #12February 06, 2010, 09:01:20 am

NintendoKD

  • Veteran
  • Offline
  • ***
  • 931
  • Personal Text
    dnahtasinoivilboeraweb
    • myspace page
Re: feeler:: SO MUCH STUFF for the 1.6l
« Reply #12 on: February 06, 2010, 09:01:20 am »
I sent an e-mail to his personal, hopefully this is real, and not a troll, or maybe he is busy or forgot? ???
Logged
dnahtasinoivilboeraweb
you know, decarbonated beer is a better coolant than the stuff you buy at the auto store, and is better for you...... really
"If the boost were to rise then the throttle would remain in the wide-open throttle position, which might be fun, but probably not for long"Libbypapa
Reply #13February 06, 2010, 09:50:13 am

Familydiesel

  • Junior
  • Offline
  • **
  • 154
Re: feeler:: SO MUCH STUFF for the 1.6l
« Reply #13 on: February 06, 2010, 09:50:13 am »
Hmm, I didn't realize that the author started the post in April 19 of 2009.  To my knowledge, he hasn't responded to anyone, whether on this post or PMs, not even those posted in 2009. 

This was the author's first and only post on this site, and it is nearly 9 months old; so, I THINK THIS IS A DEAD POST.  Too bad, sounded good. 

For all who read this:  NO RESPONSE to date (2-6-10)!  :-\
Logged
1980 Diesel td pickup, Love that Diesel!
Reply #14February 06, 2010, 11:11:06 am

Rabbit on Roids

  • Guest
Re: feeler:: SO MUCH STUFF for the 1.6l
« Reply #14 on: February 06, 2010, 11:11:06 am »
he had some of that stuff on craigslist off and on, next time i see it, post up a link to it. i see posted stuff from him on there from time to time.
Logged
Pages: [1]
« previous next »