« previous next »
Pages: [1]

Author Topic: AAZ question?' small cylinder on top of valve cover  (Read 1604 times)

March 30, 2009, 03:16:49 pm

allsierra123

  • Guest
AAZ question?' small cylinder on top of valve cover
« on: March 30, 2009, 03:16:49 pm »
There is a small cylinder on the top of the valve cover It has two hoses coming out of it one goes to the block the other goes to the air intake hose with some sort of sensor type thing that plugs into it. Any idea what this might be And how I go about getting rid of it? Or if I can get rid of it.
Logged


Reply #1March 30, 2009, 03:41:14 pm

allsierra123

  • Guest
AAZ question?' small cylinder on top of valve cover
« Reply #1 on: March 30, 2009, 03:41:14 pm »
Should I leave it be or is there any advantage to ditching the hoses?
Logged
Reply #2March 30, 2009, 04:03:46 pm

allsierra123

  • Guest
AAZ question?' small cylinder on top of valve cover
« Reply #2 on: March 30, 2009, 04:03:46 pm »
I will leave it for now then. Maybe come up with a better Idea later. Im just trying to get it on the road soon.
Logged
Reply #3March 30, 2009, 06:59:18 pm

LoneWolf

  • Guest
AAZ question?' small cylinder on top of valve cover
« Reply #3 on: March 30, 2009, 06:59:18 pm »
Sory to hijack here, but on an AAZ, how important is the front breather? The SB that was in the car origonaly had a blanking plate over the breather
Logged
Reply #4March 30, 2009, 07:06:55 pm

LoneWolf

  • Guest
AAZ question?' small cylinder on top of valve cover
« Reply #4 on: March 30, 2009, 07:06:55 pm »
thats fine then, i used the block-off plate.


 when you say it was an upgrade, is it an emissions thing?
Logged
Pages: [1]
« previous next »