Hi all. I'm going to pick up my td motor this weekend (unknown year-apx 60k miles-been sitting on a shelf for many years.) I want to get all the pieces together before I do the swap. Its my commuter car so I want the downtime to be as short as possible. So the questions begin...
Motor mounts: I was reading other posts-I prefer the quieter ride-what kind+ where to get them?
Clutch: I dont plan on making 150hp-but I know I'll end up turning up the boost-what steetable combo should i run to keep things engaged?
Exhaust pipe: I'm making a 2.5" system with a Flowmaster muffler I have kicking around. What do you use for a gasket between the flange + turbo-and where do you get it?
Thanks for the help!
Welcome aboard!
I will try and thanks for reading some and having a general knowledge before your post.
Motor mounts the stock should work for you.
Clutch I think the stock should work, but an upgrade is the 16v pressure plate and flywheel if you are interested.
Ex Pipe if it is where I am thinking factory had nothing there. You should be able to lap the 2 surfaces together and get a seal.
Check Myke_W as a vendor and mod. for parts and the entire vendors section. I also sometimes use arizona autohaus
www.autohausaz.comFinally most importantly
In general don't listen to me
There are guys like Vince Waldon that know way more than me...heck his initials are VW :lol: