Author Topic: How to recognise crankshafts? (Read 1782 times)

Torchd · « **on:** February 18, 2009, 11:53:03 am »

How to recognise crankshafts?

I have two shafts which have the following numbers and figures on them in different places but no part numbers....

GER44 DE 068F F T31448.

GER52 DE 068F P51448.

Would any one know from which engine are these shafts from?

Thanks.

Torchd · « **Reply #1 on:** February 20, 2009, 11:14:58 pm »

hello?

? ANyone?!

the caveman · « **Reply #2 on:** February 21, 2009, 10:28:34 am »

I just looked in Vagcat and neither one of those numbers pull up anything. They may be the manufacturers #'s and not VW's . They are both diesel though. If you have them in your hands can they be checked side by side with a vernier or a whatsamacallit [sorry i have the flu and my brain isn't working too well at the moment]. Or a good machine shop might be able to check them.

gigaz2 · « **Reply #3 on:** February 21, 2009, 04:46:50 pm »

another Etka quest returned:

jk/JR/cr/jk/CY/SB/RA..... : 068 105 101 M
AAZ/1Y.... : 028 105 101 J
1Z : : 028 105 101 L

so as 105101 basically says its a crankshaft, the reference can be 068M, 028J or 028L respectively, I searched the 068F, but found nothing

Torchd · « **Reply #4 on:** February 22, 2009, 11:23:21 am »

hmmm... Interesting.

I didnt find any other numbers on it.

I will get them measured. Thanks alot!