Author Topic: FS: G60 Intake Manifold (Read 6126 times)

AudiVWguy · « **on:** February 02, 2009, 07:22:44 pm »

For sale: G60 Intake Manifold. Very clean, ready to bolt on to your next project. $60.00 plus shipping. Thanks for looking.

[/b]

AudiVWguy · « **Reply #1 on:** April 10, 2009, 04:20:10 pm »

Anybody else using one of these? I feel it's a superior design over the stock intake.

jtanguay · « **Reply #2 on:** April 12, 2009, 10:43:28 pm »

with a little work this could be made to work with a 1.9TD right? how much does it weigh? this wouldn't clear a k24 turbo would it?

AudiVWguy · « **Reply #3 on:** April 13, 2009, 09:06:18 am »

See if these pics help. I'm not sure what exhaust manifold you are using.

AudiVWguy · « **Reply #4 on:** April 23, 2009, 10:46:05 pm »

Bumpsky

Turbinepowered · « **Reply #5 on:** April 24, 2009, 02:22:13 am »

Ginormous turbo. :shock:

CdnVWJunkie · « **Reply #6 on:** April 24, 2009, 04:11:54 am »

That intake charge pipe is beautiful. Absolutely looks factory.

truckinwagen · « **Reply #7 on:** April 24, 2009, 10:14:52 am »

its a callaway piece if I am not mistaken.

foxracer1 · « **Reply #8 on:** April 24, 2009, 02:55:56 pm »

I like how that setup gives the intake more room to "breathe" instead of the stock TD setup with the turbo mating with the intake sharing its heat.

hamradio · « **Reply #9 on:** April 24, 2009, 03:46:01 pm »

That manifold looks a lot like a stock CIS gasser one to me...I thought the g60 ones were a lot more 'squareish' looking?

truckinwagen · « **Reply #10 on:** April 24, 2009, 07:26:20 pm »

the G60 and cis manifolds are very similar.

the G60 one is a little stockier with slightly shorter runners and a slightly bigger plenum.

AudiVWguy · « **Reply #11 on:** April 27, 2009, 12:13:53 pm »

The piece from the turbo to the manifold is custom Callaway.

It was removed to add the inter-cooler.
Yeah, the turbo is a little too big, maybe someone else can use it. I will have it for sale in a couple of months.

truckinwagen · « **Reply #12 on:** April 27, 2009, 06:26:39 pm »

what kind of turbo is it?

if it is something I might be able to use I might wait on getting a new one until you are selling yours.

-Owen

AudiVWguy · « **Reply #13 on:** April 27, 2009, 08:43:43 pm »

It's a Roto-Master turbo. I believe they were consumed by Garrett. The place that rebuilt it did a fantastic job. I was talking with the owner, he has a balancing machine that is so sensitive that if you laid a piece of paper from a hole punch on one of the blades, it could tell. :shock:
I'm in the process of moving and the turbo specs are written in the shop manual, so I can't find it right now. I know from the original picture that the A/R on the intake is 60.

Kinda gitten off track here......YES, THE INTAKE IS STILL FOR SALE!!!

Author Topic: FS: G60 Intake Manifold (Read 6126 times)

AudiVWguy

AudiVWguy

AudiVWguy

AudiVWguy

AudiVWguy

AudiVWguy